dotfiles

 # vim:fileencoding=utf-8:ft=conf:foldmethod=marker
 
 #: Fonts {{{
 
 #: kitty has very powerful font management. You can configure
 #: individual font faces and even specify special fonts for particular
 #: characters.
 
 # font_family      Ubuntu Mono Nerd Font
 # font_family      FiraCode-Regular
 font_family      JetBrainsMono-Regular
 bold_font        JetBrainsMono-Bold
 italic_font      JetBrainsMono-Italic
 bold_italic_font JetBrainsMono-Bold-Italic
 
 #: You can specify different fonts for the bold/italic/bold-italic
 #: variants. To get a full list of supported fonts use the `kitty
 #: list-fonts` command. By default they are derived automatically, by
 #: the OSes font system. Setting them manually is useful for font
 #: families that have many weight variants like Book, Medium, Thick,
 #: etc. For example::
 
 #:     font_family      Operator Mono Book
 #:     bold_font        Operator Mono Medium
 #:     italic_font      Operator Mono Book Italic
 #:     bold_italic_font Operator Mono Medium Italic
 
 font_size 10
 
 #: Font size (in pts)
 
 force_ltr no
 
 #: kitty does not support BIDI (bidirectional text), however, for RTL
 #: scripts, words are automatically displayed in RTL. That is to say,
 #: in an RTL script, the words "HELLO WORLD" display in kitty as
 #: "WORLD HELLO", and if you try to select a substring of an RTL-
 #: shaped string, you will get the character that would be there had
 #: the the string been LTR. For example, assuming the Hebrew word
 #: ירושלים, selecting the character that on the screen appears to be ם
 #: actually writes into the selection buffer the character י.
 
 #: kitty's default behavior is useful in conjunction with a filter to
 #: reverse the word order, however, if you wish to manipulate RTL
 #: glyphs, it can be very challenging to work with, so this option is
 #: provided to turn it off. Furthermore, this option can be used with
 #: the command line program GNU FriBidi
 #: <https://github.com/fribidi/fribidi#executable> to get BIDI
 #: support, because it will force kitty to always treat the text as
 #: LTR, which FriBidi expects for terminals.
 
 adjust_line_height  5%
 adjust_column_width 5%
 
 #: Change the size of each character cell kitty renders. You can use
 #: either numbers, which are interpreted as pixels or percentages
 #: (number followed by %), which are interpreted as percentages of the
 #: unmodified values. You can use negative pixels or percentages less
 #: than 100% to reduce sizes (but this might cause rendering
 #: artifacts).
 
 # symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols
 
 #: Map the specified unicode codepoints to a particular font. Useful
 #: if you need special rendering for some symbols, such as for
 #: Powerline. Avoids the need for patched fonts. Each unicode code
 #: point is specified in the form U+<code point in hexadecimal>. You
 #: can specify multiple code points, separated by commas and ranges
 #: separated by hyphens. symbol_map itself can be specified multiple
 #: times. Syntax is::
 
 #:     symbol_map codepoints Font Family Name
 
 disable_ligatures never
 
 #: Choose how you want to handle multi-character ligatures. The
 #: default is to always render them.  You can tell kitty to not render
 #: them when the cursor is over them by using cursor to make editing
 #: easier, or have kitty never render them at all by using always, if
 #: you don't like them. The ligature strategy can be set per-window
 #: either using the kitty remote control facility or by defining
 #: shortcuts for it in kitty.conf, for example::
 
 #:     map alt+1 disable_ligatures_in active always
 #:     map alt+2 disable_ligatures_in all never
 #:     map alt+3 disable_ligatures_in tab cursor
 
 #: Note that this refers to programming ligatures, typically
 #: implemented using the calt OpenType feature. For disabling general
 #: ligatures, use the font_features setting.
 
 font_features none
 
 #: Choose exactly which OpenType features to enable or disable. This
 #: is useful as some fonts might have features worthwhile in a
 #: terminal. For example, Fira Code Retina includes a discretionary
 #: feature, zero, which in that font changes the appearance of the
 #: zero (0), to make it more easily distinguishable from Ø. Fira Code
 #: Retina also includes other discretionary features known as
 #: Stylistic Sets which have the tags ss01 through ss20.
 
 #: Note that this code is indexed by PostScript name, and not the font
 #: family. This allows you to define very precise feature settings;
 #: e.g. you can disable a feature in the italic font but not in the
 #: regular font.
 
 #: On Linux, these are read from the FontConfig database first and
 #: then this, setting is applied, so they can be configured in a
 #: single, central place.
 
 #: To get the PostScript name for a font, use kitty + list-fonts
 #: --psnames:
 
 #: .. code-block:: sh
 
 #:     $ kitty + list-fonts --psnames | grep Fira
 #:     Fira Code
 #:     Fira Code Bold (FiraCode-Bold)
 #:     Fira Code Light (FiraCode-Light)
 #:     Fira Code Medium (FiraCode-Medium)
 #:     Fira Code Regular (FiraCode-Regular)
 #:     Fira Code Retina (FiraCode-Retina)
 
 #: The part in brackets is the PostScript name.
 
 #: Enable alternate zero and oldstyle numerals::
 
 #:     font_features FiraCode-Retina +zero +onum
 
 #: Enable only alternate zero::
 
 #:     font_features FiraCode-Retina +zero
 
 #: Disable the normal ligatures, but keep the calt feature which (in
 #: this font) breaks up monotony::
 
 #:     font_features TT2020StyleB-Regular -liga +calt
 
 #: In conjunction with force_ltr, you may want to disable Arabic
 #: shaping entirely, and only look at their isolated forms if they
 #: show up in a document. You can do this with e.g.::
 
 #:     font_features UnifontMedium +isol -medi -fina -init
 
 box_drawing_scale 0.001, 1, 1.5, 2
 
 #: Change the sizes of the lines used for the box drawing unicode
 #: characters These values are in pts. They will be scaled by the
 #: monitor DPI to arrive at a pixel value. There must be four values
 #: corresponding to thin, normal, thick, and very thick lines.
 
 #: }}}
 
 #: Cursor customization {{{
 
 cursor                  #928374
 
 #: Default cursor color
 
 cursor_text_color #111111
 
 #: Choose the color of text under the cursor. If you want it rendered
 #: with the background color of the cell underneath instead, use the
 #: special keyword: background
 
 cursor_shape block
 
 #: The cursor shape can be one of (block, beam, underline)
 
 cursor_beam_thickness 1.5
 
 #: Defines the thickness of the beam cursor (in pts)
 
 cursor_underline_thickness 2.0
 
 #: Defines the thickness of the underline cursor (in pts)
 
 cursor_blink_interval -1
 
 #: The interval (in seconds) at which to blink the cursor. Set to zero
 #: to disable blinking. Negative values mean use system default. Note
 #: that numbers smaller than repaint_delay will be limited to
 #: repaint_delay.
 
 cursor_stop_blinking_after 30.0
 
 #: Stop blinking cursor after the specified number of seconds of
 #: keyboard inactivity.  Set to zero to never stop blinking.
 
 #: }}}
 
 #: Scrollback {{{
 
 scrollback_lines 5000
 
 #: Number of lines of history to keep in memory for scrolling back.
 #: Memory is allocated on demand. Negative numbers are (effectively)
 #: infinite scrollback. Note that using very large scrollback is not
 #: recommended as it can slow down performance of the terminal and
 #: also use large amounts of RAM. Instead, consider using
 #: scrollback_pager_history_size.
 
 scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER
 
 #: Program with which to view scrollback in a new window. The
 #: scrollback buffer is passed as STDIN to this program. If you change
 #: it, make sure the program you use can handle ANSI escape sequences
 #: for colors and text formatting. INPUT_LINE_NUMBER in the command
 #: line above will be replaced by an integer representing which line
 #: should be at the top of the screen. Similarly CURSOR_LINE and
 #: CURSOR_COLUMN will be replaced by the current cursor position.
 
 scrollback_pager_history_size 0
 
 #: Separate scrollback history size, used only for browsing the
 #: scrollback buffer (in MB). This separate buffer is not available
 #: for interactive scrolling but will be piped to the pager program
 #: when viewing scrollback buffer in a separate window. The current
 #: implementation stores the data in UTF-8, so approximatively 10000
 #: lines per megabyte at 100 chars per line, for pure ASCII text,
 #: unformatted text. A value of zero or less disables this feature.
 #: The maximum allowed size is 4GB.
 
 scrollback_fill_enlarged_window no
 
 #: Fill new space with lines from the scrollback buffer after
 #: enlarging a window.
 
 wheel_scroll_multiplier 5.0
 
 #: Modify the amount scrolled by the mouse wheel. Note this is only
 #: used for low precision scrolling devices, not for high precision
 #: scrolling on platforms such as macOS and Wayland. Use negative
 #: numbers to change scroll direction.
 
 touch_scroll_multiplier 1.0
 
 #: Modify the amount scrolled by a touchpad. Note this is only used
 #: for high precision scrolling devices on platforms such as macOS and
 #: Wayland. Use negative numbers to change scroll direction.
 
 #: }}}
 
 #: Mouse {{{
 
 mouse_hide_wait 3.0
 
 #: Hide mouse cursor after the specified number of seconds of the
 #: mouse not being used. Set to zero to disable mouse cursor hiding.
 #: Set to a negative value to hide the mouse cursor immediately when
 #: typing text. Disabled by default on macOS as getting it to work
 #: robustly with the ever-changing sea of bugs that is Cocoa is too
 #: much effort.
 
 url_color #0087bd
 url_style curly
 
 #: The color and style for highlighting URLs on mouse-over. url_style
 #: can be one of: none, single, double, curly
 
 open_url_modifiers kitty_mod
 
 #: The modifier keys to press when clicking with the mouse on URLs to
 #: open the URL
 
 open_url_with default
 
 #: The program with which to open URLs that are clicked on. The
 #: special value default means to use the operating system's default
 #: URL handler.
 
 url_prefixes http https file ftp gemini irc gopher mailto news git
 
 #: The set of URL prefixes to look for when detecting a URL under the
 #: mouse cursor.
 
 detect_urls yes
 
 #: Detect URLs under the mouse. Detected URLs are highlighted with an
 #: underline and the mouse cursor becomes a hand over them. Even if
 #: this option is disabled, URLs are still clickable.
 
 copy_on_select no
 
 #: Copy to clipboard or a private buffer on select. With this set to
 #: clipboard, simply selecting text with the mouse will cause the text
 #: to be copied to clipboard. Useful on platforms such as macOS that
 #: do not have the concept of primary selections. You can instead
 #: specify a name such as a1 to copy to a private kitty buffer
 #: instead. Map a shortcut with the paste_from_buffer action to paste
 #: from this private buffer. For example::
 
 #:     map cmd+shift+v paste_from_buffer a1
 
 #: Note that copying to the clipboard is a security risk, as all
 #: programs, including websites open in your browser can read the
 #: contents of the system clipboard.
 
 strip_trailing_spaces never
 
 #: Remove spaces at the end of lines when copying to clipboard. A
 #: value of smart will do it when using normal selections, but not
 #: rectangle selections. always will always do it.
 
 rectangle_select_modifiers ctrl+alt
 
 #: The modifiers to use rectangular selection (i.e. to select text in
 #: a rectangular block with the mouse)
 
 terminal_select_modifiers shift
 
 #: The modifiers to override mouse selection even when a terminal
 #: application has grabbed the mouse
 
 select_by_word_characters @-./_~?&=%+#
 
 #: Characters considered part of a word when double clicking. In
 #: addition to these characters any character that is marked as an
 #: alphanumeric character in the unicode database will be matched.
 
 click_interval -1.0
 
 #: The interval between successive clicks to detect double/triple
 #: clicks (in seconds). Negative numbers will use the system default
 #: instead, if available, or fallback to 0.5.
 
 focus_follows_mouse no
 
 #: Set the active window to the window under the mouse when moving the
 #: mouse around
 
 pointer_shape_when_grabbed arrow
 
 #: The shape of the mouse pointer when the program running in the
 #: terminal grabs the mouse. Valid values are: arrow, beam and hand
 
 default_pointer_shape beam
 
 #: The default shape of the mouse pointer. Valid values are: arrow,
 #: beam and hand
 
 pointer_shape_when_dragging beam
 
 #: The default shape of the mouse pointer when dragging across text.
 #: Valid values are: arrow, beam and hand
 
 #: }}}
 
 #: Performance tuning {{{
 
 repaint_delay 11
 
 #: Delay (in milliseconds) between screen updates. Decreasing it,
 #: increases frames-per-second (FPS) at the cost of more CPU usage.
 #: The default value yields ~100 FPS which is more than sufficient for
 #: most uses. Note that to actually achieve 100 FPS you have to either
 #: set sync_to_monitor to no or use a monitor with a high refresh
 #: rate. Also, to minimize latency when there is pending input to be
 #: processed, repaint_delay is ignored.
 
 input_delay 8
 
 #: Delay (in milliseconds) before input from the program running in
 #: the terminal is processed. Note that decreasing it will increase
 #: responsiveness, but also increase CPU usage and might cause flicker
 #: in full screen programs that redraw the entire screen on each loop,
 #: because kitty is so fast that partial screen updates will be drawn.
 
 sync_to_monitor yes
 
 #: Sync screen updates to the refresh rate of the monitor. This
 #: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing)
 #: when scrolling. However, it limits the rendering speed to the
 #: refresh rate of your monitor. With a very high speed mouse/high
 #: keyboard repeat rate, you may notice some slight input latency. If
 #: so, set this to no.
 
 #: }}}
 
 #: Terminal bell {{{
 
 enable_audio_bell yes
 
 #: Enable/disable the audio bell. Useful in environments that require
 #: silence.
 
 visual_bell_duration 0.0
 
 #: Visual bell duration. Flash the screen when a bell occurs for the
 #: specified number of seconds. Set to zero to disable.
 
 window_alert_on_bell yes
 
 #: Request window attention on bell. Makes the dock icon bounce on
 #: macOS or the taskbar flash on linux.
 
 bell_on_tab yes
 
 #: Show a bell symbol on the tab if a bell occurs in one of the
 #: windows in the tab and the window is not the currently focused
 #: window
 
 command_on_bell none
 
 #: Program to run when a bell occurs.
 
 #: }}}
 
 #: Window layout {{{
 
 remember_window_size  yes
 initial_window_width  640
 initial_window_height 400
 
 #: If enabled, the window size will be remembered so that new
 #: instances of kitty will have the same size as the previous
 #: instance. If disabled, the window will initially have size
 #: configured by initial_window_width/height, in pixels. You can use a
 #: suffix of "c" on the width/height values to have them interpreted
 #: as number of cells instead of pixels.
 
 enabled_layouts *
 
 #: The enabled window layouts. A comma separated list of layout names.
 #: The special value all means all layouts. The first listed layout
 #: will be used as the startup layout. Default configuration is all
 #: layouts in alphabetical order. For a list of available layouts, see
 #: the https://sw.kovidgoyal.net/kitty/index.html#layouts.
 
 window_resize_step_cells 2
 window_resize_step_lines 2
 
 #: The step size (in units of cell width/cell height) to use when
 #: resizing windows. The cells value is used for horizontal resizing
 #: and the lines value for vertical resizing.
 
 window_border_width 0pt
 
 #: The width of window borders. Can be either in pixels (px) or pts
 #: (pt). Values in pts will be rounded to the nearest number of pixels
 #: based on screen resolution. If not specified the unit is assumed to
 #: be pts. Note that borders are displayed only when more than one
 #: window is visible. They are meant to separate multiple windows.
 
 draw_minimal_borders yes
 
 #: Draw only the minimum borders needed. This means that only the
 #: minimum needed borders for inactive windows are drawn. That is only
 #: the borders that separate the inactive window from a neighbor. Note
 #: that setting a non-zero window margin overrides this and causes all
 #: borders to be drawn.
 
 window_margin_width 0
 
 #: The window margin (in pts) (blank area outside the border). A
 #: single value sets all four sides. Two values set the vertical and
 #: horizontal sides. Three values set top, horizontal and bottom. Four
 #: values set top, right, bottom and left.
 
 single_window_margin_width -1
 
 #: The window margin (in pts) to use when only a single window is
 #: visible. Negative values will cause the value of
 #: window_margin_width to be used instead. A single value sets all
 #: four sides. Two values set the vertical and horizontal sides. Three
 #: values set top, horizontal and bottom. Four values set top, right,
 #: bottom and left.
 
 window_padding_width 0
 
 #: The window padding (in pts) (blank area between the text and the
 #: window border). A single value sets all four sides. Two values set
 #: the vertical and horizontal sides. Three values set top, horizontal
 #: and bottom. Four values set top, right, bottom and left.
 
 placement_strategy center
 
 #: When the window size is not an exact multiple of the cell size, the
 #: cell area of the terminal window will have some extra padding on
 #: the sides. You can control how that padding is distributed with
 #: this option. Using a value of center means the cell area will be
 #: placed centrally. A value of top-left means the padding will be on
 #: only the bottom and right edges.
 
 active_border_color #00ff00
 
 #: The color for the border of the active window. Set this to none to
 #: not draw borders around the active window.
 
 inactive_border_color #cccccc
 
 #: The color for the border of inactive windows
 
 bell_border_color #ff5a00
 
 #: The color for the border of inactive windows in which a bell has
 #: occurred
 
 inactive_text_alpha 1.0
 
 #: Fade the text in inactive windows by the specified amount (a number
 #: between zero and one, with zero being fully faded).
 
 hide_window_decorations no
 
 #: Hide the window decorations (title-bar and window borders) with
 #: yes. On macOS, titlebar-only can be used to only hide the titlebar.
 #: Whether this works and exactly what effect it has depends on the
 #: window manager/operating system.
 
 resize_debounce_time 0.1
 
 #: The time (in seconds) to wait before redrawing the screen when a
 #: resize event is received. On platforms such as macOS, where the
 #: operating system sends events corresponding to the start and end of
 #: a resize, this number is ignored.
 
 resize_draw_strategy static
 
 #: Choose how kitty draws a window while a resize is in progress. A
 #: value of static means draw the current window contents, mostly
 #: unchanged. A value of scale means draw the current window contents
 #: scaled. A value of blank means draw a blank window. A value of size
 #: means show the window size in cells.
 
 resize_in_steps no
 
 #: Resize the OS window in steps as large as the cells, instead of
 #: with the usual pixel accuracy. Combined with an
 #: initial_window_width and initial_window_height in number of cells,
 #: this option can be used to keep the margins as small as possible
 #: when resizing the OS window. Note that this does not currently work
 #: on Wayland.
 
 confirm_os_window_close 0
 
 #: Ask for confirmation when closing an OS window or a tab that has at
 #: least this number of kitty windows in it. A value of zero disables
 #: confirmation. This confirmation also applies to requests to quit
 #: the entire application (all OS windows, via the quit action).
 
 #: }}}
 
 #: Tab bar {{{
 
 tab_bar_edge bottom
 
 #: Which edge to show the tab bar on, top or bottom
 
 tab_bar_margin_width 0.0
 
 #: The margin to the left and right of the tab bar (in pts)
 
 tab_bar_style fade
 
 #: The tab bar style, can be one of: fade, separator, powerline, or
 #: hidden. In the fade style, each tab's edges fade into the
 #: background color, in the separator style, tabs are separated by a
 #: configurable separator, and the powerline shows the tabs as a
 #: continuous line. If you use the hidden style, you might want to
 #: create a mapping for the select_tab action which presents you with
 #: a list of tabs and allows for easy switching to a tab.
 
 tab_bar_min_tabs 2
 
 #: The minimum number of tabs that must exist before the tab bar is
 #: shown
 
 tab_switch_strategy previous
 
 #: The algorithm to use when switching to a tab when the current tab
 #: is closed. The default of previous will switch to the last used
 #: tab. A value of left will switch to the tab to the left of the
 #: closed tab. A value of right will switch to the tab to the right of
 #: the closed tab. A value of last will switch to the right-most tab.
 
 tab_fade 0.25 0.5 0.75 1
 
 #: Control how each tab fades into the background when using fade for
 #: the tab_bar_style. Each number is an alpha (between zero and one)
 #: that controls how much the corresponding cell fades into the
 #: background, with zero being no fade and one being full fade. You
 #: can change the number of cells used by adding/removing entries to
 #: this list.
 
 tab_separator " ┇"
 
 #: The separator between tabs in the tab bar when using separator as
 #: the tab_bar_style.
 
 tab_powerline_style angled
 
 #: The powerline separator style between tabs in the tab bar when
 #: using powerline as the tab_bar_style, can be one of: angled,
 #: slanted, or round.
 
 tab_activity_symbol none
 
 #: Some text or a unicode symbol to show on the tab if a window in the
 #: tab that does not have focus has some activity.
 
 tab_title_template "{title}"
 
 #: A template to render the tab title. The default just renders the
 #: title. If you wish to include the tab-index as well, use something
 #: like: {index}: {title}. Useful if you have shortcuts mapped for
 #: goto_tab N. In addition you can use {layout_name} for the current
 #: layout name and {num_windows} for the number of windows in the tab.
 #: Note that formatting is done by Python's string formatting
 #: machinery, so you can use, for instance, {layout_name[:2].upper()}
 #: to show only the first two letters of the layout name, upper-cased.
 #: If you want to style the text, you can use styling directives, for
 #: example: {fmt.fg.red}red{fmt.fg.default}normal{fmt.bg._00FF00}green
 #: bg{fmt.bg.normal}. Similarly, for bold and italic:
 #: {fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}.
 
 active_tab_title_template none
 
 #: Template to use for active tabs, if not specified falls back to
 #: tab_title_template.
 
 active_tab_foreground   #000
 active_tab_background   #eee
 active_tab_font_style   bold-italic
 inactive_tab_foreground #444
 inactive_tab_background #999
 inactive_tab_font_style normal
 
 #: Tab bar colors and styles
 
 tab_bar_background none
 
 #: Background color for the tab bar. Defaults to using the terminal
 #: background color.
 
 #: }}}
 
 #: Color scheme {{{
 
 background              #0A0A0A
 foreground              #fbf1c7
 
 #: background #181818
 
 #: The foreground and background colors
 
 background_opacity 0.9
 
 #: The opacity of the background. A number between 0 and 1, where 1 is
 #: opaque and 0 is fully transparent.  This will only work if
 #: supported by the OS (for instance, when using a compositor under
 #: X11). Note that it only sets the background color's opacity in
 #: cells that have the same background color as the default terminal
 #: background. This is so that things like the status bar in vim,
 #: powerline prompts, etc. still look good.  But it means that if you
 #: use a color theme with a background color in your editor, it will
 #: not be rendered as transparent.  Instead you should change the
 #: default background color in your kitty config and not use a
 #: background color in the editor color scheme. Or use the escape
 #: codes to set the terminals default colors in a shell script to
 #: launch your editor.  Be aware that using a value less than 1.0 is a
 #: (possibly significant) performance hit.  If you want to dynamically
 #: change transparency of windows set dynamic_background_opacity to
 #: yes (this is off by default as it has a performance cost)
 
 background_image none
 
 #: Path to a background image. Must be in PNG format.
 
 background_image_layout tiled
 
 #: Whether to tile or scale the background image.
 
 background_image_linear no
 
 #: When background image is scaled, whether linear interpolation
 #: should be used.
 
 dynamic_background_opacity no
 
 #: Allow changing of the background_opacity dynamically, using either
 #: keyboard shortcuts (increase_background_opacity and
 #: decrease_background_opacity) or the remote control facility.
 
 background_tint 0.0
 
 #: How much to tint the background image by the background color. The
 #: tint is applied only under the text area, not margin/borders. Makes
 #: it easier to read the text. Tinting is done using the current
 #: background color for each window. This setting applies only if
 #: background_opacity is set and transparent windows are supported or
 #: background_image is set.
 
 dim_opacity 0.75
 
 #: How much to dim text that has the DIM/FAINT attribute set. One
 #: means no dimming and zero means fully dimmed (i.e. invisible).
 
 selection_foreground    #928374
 
 #: The foreground for text selected with the mouse. A value of none
 #: means to leave the color unchanged.
 
 selection_background    #ebdbb2
 
 #: The background for text selected with the mouse.
 
 
 #: The 256 terminal colors. There are 8 basic colors, each color has a
 #: dull and bright version, for the first 16 colors. You can set the
 #: remaining 240 colors as color16 to color255.
 
 color0 #171717
 color8 #BBAAAA
 
 # black
 color0                  #282828
 color8                  #7c6f64
 
 # red
 color1                  #cc241d
 color9                  #fb4934
 
 #: green
 color2                  #98971a
 color10                 #b8bb26
 
 # yellow
 color3                  #d79921
 color11                 #fabd2f
 
 # blue
 color4                  #458588
 color12                 #83a598
 
 # purple
 color5                  #b16286
 color13                 #d3869b
 
 # aqua
 color6                  #689d6a
 color14                 #8ec07c
 
 # white
 color7                  #a89984
 color15                 #fbf1c7
 
 mark1_foreground black
 
 #: Color for marks of type 1
 
 mark1_background #98d3cb
 
 #: Color for marks of type 1 (light steel blue)
 
 mark2_foreground black
 
 #: Color for marks of type 2
 
 mark2_background #f2dcd3
 
 #: Color for marks of type 1 (beige)
 
 mark3_foreground black
 
 #: Color for marks of type 3
 
 mark3_background #f274bc
 
 #: Color for marks of type 1 (violet)
 
 #: }}}
 
 #: Advanced {{{
 
 shell .
 
 #: The shell program to execute. The default value of . means to use
 #: whatever shell is set as the default shell for the current user.
 #: Note that on macOS if you change this, you might need to add
 #: --login to ensure that the shell starts in interactive mode and
 #: reads its startup rc files.
 
 editor .
 
 #: The console editor to use when editing the kitty config file or
 #: similar tasks. A value of . means to use the environment variables
 #: VISUAL and EDITOR in that order. Note that this environment
 #: variable has to be set not just in your shell startup scripts but
 #: system-wide, otherwise kitty will not see it.
 
 close_on_child_death no
 
 #: Close the window when the child process (shell) exits. If no (the
 #: default), the terminal will remain open when the child exits as
 #: long as there are still processes outputting to the terminal (for
 #: example disowned or backgrounded processes). If yes, the window
 #: will close as soon as the child process exits. Note that setting it
 #: to yes means that any background processes still using the terminal
 #: can fail silently because their stdout/stderr/stdin no longer work.
 
 allow_remote_control no
 
 #: Allow other programs to control kitty. If you turn this on other
 #: programs can control all aspects of kitty, including sending text
 #: to kitty windows, opening new windows, closing windows, reading the
 #: content of windows, etc.  Note that this even works over ssh
 #: connections. You can chose to either allow any program running
 #: within kitty to control it, with yes or only programs that connect
 #: to the socket specified with the kitty --listen-on command line
 #: option, if you use the value socket-only. The latter is useful if
 #: you want to prevent programs running on a remote computer over ssh
 #: from controlling kitty.
 
 listen_on none
 
 #: Tell kitty to listen to the specified unix/tcp socket for remote
 #: control connections. Note that this will apply to all kitty
 #: instances. It can be overridden by the kitty --listen-on command
 #: line flag. This option accepts only UNIX sockets, such as
 #: unix:${TEMP}/mykitty or (on Linux) unix:@mykitty. Environment
 #: variables are expanded. If {kitty_pid} is present then it is
 #: replaced by the PID of the kitty process, otherwise the PID of the
 #: kitty process is appended to the value, with a hyphen. This option
 #: is ignored unless you also set allow_remote_control to enable
 #: remote control. See the help for kitty --listen-on for more
 #: details.
 
 # env 
 
 #: Specify environment variables to set in all child processes. Note
 #: that environment variables are expanded recursively, so if you
 #: use::
 
 #:     env MYVAR1=a
 #:     env MYVAR2=${MYVAR1}/${HOME}/b
 
 #: The value of MYVAR2 will be a/<path to home directory>/b.
 
 update_check_interval 24
 
 #: Periodically check if an update to kitty is available. If an update
 #: is found a system notification is displayed informing you of the
 #: available update. The default is to check every 24 hrs, set to zero
 #: to disable.
 
 startup_session none
 
 #: Path to a session file to use for all kitty instances. Can be
 #: overridden by using the kitty --session command line option for
 #: individual instances. See
 #: https://sw.kovidgoyal.net/kitty/index.html#sessions in the kitty
 #: documentation for details. Note that relative paths are interpreted
 #: with respect to the kitty config directory. Environment variables
 #: in the path are expanded.
 
 clipboard_control write-clipboard write-primary
 
 #: Allow programs running in kitty to read and write from the
 #: clipboard. You can control exactly which actions are allowed. The
 #: set of possible actions is: write-clipboard read-clipboard write-
 #: primary read-primary. You can additionally specify no-append to
 #: disable kitty's protocol extension for clipboard concatenation. The
 #: default is to allow writing to the clipboard and primary selection
 #: with concatenation enabled. Note that enabling the read
 #: functionality is a security risk as it means that any program, even
 #: one running on a remote server via SSH can read your clipboard.
 
 allow_hyperlinks yes
 
 #: Process hyperlink (OSC 8) escape sequences. If disabled OSC 8
 #: escape sequences are ignored. Otherwise they become clickable
 #: links, that you can click by holding down ctrl+shift and clicking
 #: with the mouse. The special value of ``ask`` means that kitty will
 #: ask before opening the link.
 
 term xterm-kitty
 
 #: The value of the TERM environment variable to set. Changing this
 #: can break many terminal programs, only change it if you know what
 #: you are doing, not because you read some advice on Stack Overflow
 #: to change it. The TERM variable is used by various programs to get
 #: information about the capabilities and behavior of the terminal. If
 #: you change it, depending on what programs you run, and how
 #: different the terminal you are changing it to is, various things
 #: from key-presses, to colors, to various advanced features may not
 #: work.
 
 #: }}}
 
 #: OS specific tweaks {{{
 
 wayland_titlebar_color system
 
 #: Change the color of the kitty window's titlebar on Wayland systems
 #: with client side window decorations such as GNOME. A value of
 #: system means to use the default system color, a value of background
 #: means to use the background color of the currently active window
 #: and finally you can use an arbitrary color, such as #12af59 or red.
 
 macos_titlebar_color system
 
 #: Change the color of the kitty window's titlebar on macOS. A value
 #: of system means to use the default system color, a value of
 #: background means to use the background color of the currently
 #: active window and finally you can use an arbitrary color, such as
 #: #12af59 or red. WARNING: This option works by using a hack, as
 #: there is no proper Cocoa API for it. It sets the background color
 #: of the entire window and makes the titlebar transparent. As such it
 #: is incompatible with background_opacity. If you want to use both,
 #: you are probably better off just hiding the titlebar with
 #: hide_window_decorations.
 
 macos_option_as_alt no
 
 #: Use the option key as an alt key. With this set to no, kitty will
 #: use the macOS native Option+Key = unicode character behavior. This
 #: will break any Alt+key keyboard shortcuts in your terminal
 #: programs, but you can use the macOS unicode input technique. You
 #: can use the values: left, right, or both to use only the left,
 #: right or both Option keys as Alt, instead.
 
 macos_hide_from_tasks no
 
 #: Hide the kitty window from running tasks (⌘+Tab) on macOS.
 
 macos_quit_when_last_window_closed no
 
 #: Have kitty quit when all the top-level windows are closed. By
 #: default, kitty will stay running, even with no open windows, as is
 #: the expected behavior on macOS.
 
 macos_window_resizable yes
 
 #: Disable this if you want kitty top-level (OS) windows to not be
 #: resizable on macOS.
 
 macos_thicken_font 0
 
 #: Draw an extra border around the font with the given width, to
 #: increase legibility at small font sizes. For example, a value of
 #: 0.75 will result in rendering that looks similar to sub-pixel
 #: antialiasing at common font sizes.
 
 macos_traditional_fullscreen no
 
 #: Use the traditional full-screen transition, that is faster, but
 #: less pretty.
 
 macos_show_window_title_in all
 
 #: Show or hide the window title in the macOS window or menu-bar. A
 #: value of window will show the title of the currently active window
 #: at the top of the macOS window. A value of menubar will show the
 #: title of the currently active window in the macOS menu-bar, making
 #: use of otherwise wasted space. all will show the title everywhere
 #: and none hides the title in the window and the menu-bar.
 
 macos_custom_beam_cursor no
 
 #: Enable/disable custom mouse cursor for macOS that is easier to see
 #: on both light and dark backgrounds. WARNING: this might make your
 #: mouse cursor invisible on dual GPU machines.
 
 linux_display_server auto
 
 #: Choose between Wayland and X11 backends. By default, an appropriate
 #: backend based on the system state is chosen automatically. Set it
 #: to x11 or wayland to force the choice.
 
 #: }}}
 
 #: Keyboard shortcuts {{{
 
 #: Keys are identified simply by their lowercase unicode characters.
 #: For example: ``a`` for the A key, ``[`` for the left square bracket
 #: key, etc. For functional keys, such as ``Enter or Escape`` the
 #: names are present at https://sw.kovidgoyal.net/kitty/keyboard-
 #: protocol.html#functional-key-definitions. For a list of modifier
 #: names, see: GLFW mods
 #: <https://www.glfw.org/docs/latest/group__mods.html>
 
 #: On Linux you can also use XKB key names to bind keys that are not
 #: supported by GLFW. See XKB keys
 #: <https://github.com/xkbcommon/libxkbcommon/blob/master/xkbcommon/xkbcommon-
 #: keysyms.h> for a list of key names. The name to use is the part
 #: after the XKB_KEY_ prefix. Note that you can only use an XKB key
 #: name for keys that are not known as GLFW keys.
 
 #: Finally, you can use raw system key codes to map keys, again only
 #: for keys that are not known as GLFW keys. To see the system key
 #: code for a key, start kitty with the kitty --debug-keyboard option.
 #: Then kitty will output some debug text for every key event. In that
 #: text look for ``native_code`` the value of that becomes the key
 #: name in the shortcut. For example:
 
 #: .. code-block:: none
 
 #:     on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a'
 
 #: Here, the key name for the A key is 0x61 and you can use it with::
 
 #:     map ctrl+0x61 something
 
 #: to map ctrl+a to something.
 
 #: You can use the special action no_op to unmap a keyboard shortcut
 #: that is assigned in the default configuration::
 
 #:     map kitty_mod+space no_op
 
 #: You can combine multiple actions to be triggered by a single
 #: shortcut, using the syntax below::
 
 #:     map key combine <separator> action1 <separator> action2 <separator> action3 ...
 
 #: For example::
 
 #:     map kitty_mod+e combine : new_window : next_layout
 
 #: this will create a new window and switch to the next available
 #: layout
 
 #: You can use multi-key shortcuts using the syntax shown below::
 
 #:     map key1>key2>key3 action
 
 #: For example::
 
 #:     map ctrl+f>2 set_font_size 20
 
 kitty_mod ctrl+shift
 
 #: The value of kitty_mod is used as the modifier for all default
 #: shortcuts, you can change it in your kitty.conf to change the
 #: modifiers for all the default shortcuts.
 
 clear_all_shortcuts no
 
 #: You can have kitty remove all shortcut definition seen up to this
 #: point. Useful, for instance, to remove the default shortcuts.
 
 # kitten_alias hints hints --hints-offset=0
 
 #: You can create aliases for kitten names, this allows overriding the
 #: defaults for kitten options and can also be used to shorten
 #: repeated mappings of the same kitten with a specific group of
 #: options. For example, the above alias changes the default value of
 #: kitty +kitten hints --hints-offset to zero for all mappings,
 #: including the builtin ones.
 
 #: Clipboard {{{
 
 map kitty_mod+c copy_to_clipboard
 
 #: There is also a copy_or_interrupt action that can be optionally
 #: mapped to Ctrl+c. It will copy only if there is a selection and
 #: send an interrupt otherwise. Similarly, copy_and_clear_or_interrupt
 #: will copy and clear the selection or send an interrupt if there is
 #: no selection.
 
 map kitty_mod+v  paste_from_clipboard
 map kitty_mod+s  paste_from_selection
 map shift+insert paste_from_selection
 map kitty_mod+o  pass_selection_to_program
 
 #: You can also pass the contents of the current selection to any
 #: program using pass_selection_to_program. By default, the system's
 #: open program is used, but you can specify your own, the selection
 #: will be passed as a command line argument to the program, for
 #: example::
 
 #:     map kitty_mod+o pass_selection_to_program firefox
 
 #: You can pass the current selection to a terminal program running in
 #: a new kitty window, by using the @selection placeholder::
 
 #:     map kitty_mod+y new_window less @selection
 
 #: }}}
 
 #: Scrolling {{{
 
 map kitty_mod+up        scroll_line_up
 map kitty_mod+k         scroll_line_up
 map kitty_mod+down      scroll_line_down
 map kitty_mod+j         scroll_line_down
 map kitty_mod+page_up   scroll_page_up
 map kitty_mod+page_down scroll_page_down
 map kitty_mod+home      scroll_home
 map kitty_mod+end       scroll_end
 map kitty_mod+h         show_scrollback
 
 #: You can pipe the contents of the current screen + history buffer as
 #: STDIN to an arbitrary program using the ``launch`` function. For
 #: example, the following opens the scrollback buffer in less in an
 #: overlay window::
 
 #:     map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R
 
 #: For more details on piping screen and buffer contents to external
 #: programs, see launch.
 
 #: }}}
 
 #: Window management {{{
 
 map kitty_mod+enter new_window
 
 #: You can open a new window running an arbitrary program, for
 #: example::
 
 #:     map kitty_mod+y      launch mutt
 
 #: You can open a new window with the current working directory set to
 #: the working directory of the current window using::
 
 #:     map ctrl+alt+enter    launch --cwd=current
 
 #: You can open a new window that is allowed to control kitty via the
 #: kitty remote control facility by prefixing the command line with @.
 #: Any programs running in that window will be allowed to control
 #: kitty. For example::
 
 #:     map ctrl+enter launch --allow-remote-control some_program
 
 #: You can open a new window next to the currently active window or as
 #: the first window, with::
 
 #:     map ctrl+n launch --location=neighbor some_program
 #:     map ctrl+f launch --location=first some_program
 
 #: For more details, see launch.
 
 map kitty_mod+n new_os_window
 
 #: Works like new_window above, except that it opens a top level OS
 #: kitty window. In particular you can use new_os_window_with_cwd to
 #: open a window with the current working directory.
 
 map kitty_mod+w close_window
 map kitty_mod+] next_window
 map kitty_mod+[ previous_window
 map kitty_mod+f move_window_forward
 map kitty_mod+b move_window_backward
 map kitty_mod+` move_window_to_top
 map kitty_mod+r start_resizing_window
 map kitty_mod+1 first_window
 map kitty_mod+2 second_window
 map kitty_mod+3 third_window
 map kitty_mod+4 fourth_window
 map kitty_mod+5 fifth_window
 map kitty_mod+6 sixth_window
 map kitty_mod+7 seventh_window
 map kitty_mod+8 eighth_window
 map kitty_mod+9 ninth_window
 map kitty_mod+0 tenth_window
 #: }}}
 
 #: Tab management {{{
 
 map kitty_mod+right next_tab
 map kitty_mod+left  previous_tab
 map kitty_mod+t     new_tab
 map kitty_mod+q     close_tab
 map kitty_mod+.     move_tab_forward
 map kitty_mod+,     move_tab_backward
 map kitty_mod+alt+t set_tab_title
 
 #: You can also create shortcuts to go to specific tabs, with 1 being
 #: the first tab, 2 the second tab and -1 being the previously active
 #: tab, and any number larger than the last tab being the last tab::
 
 #:     map ctrl+alt+1 goto_tab 1
 #:     map ctrl+alt+2 goto_tab 2
 
 #: Just as with new_window above, you can also pass the name of
 #: arbitrary commands to run when using new_tab and use
 #: new_tab_with_cwd. Finally, if you want the new tab to open next to
 #: the current tab rather than at the end of the tabs list, use::
 
 #:     map ctrl+t new_tab !neighbor [optional cmd to run]
 #: }}}
 
 #: Layout management {{{
 
 map kitty_mod+l next_layout
 
 #: You can also create shortcuts to switch to specific layouts::
 
 #:     map ctrl+alt+t goto_layout tall
 #:     map ctrl+alt+s goto_layout stack
 
 #: Similarly, to switch back to the previous layout::
 
 #:    map ctrl+alt+p last_used_layout
 #: }}}
 
 #: Font sizes {{{
 
 #: You can change the font size for all top-level kitty OS windows at
 #: a time or only the current one.
 
 map kitty_mod+equal       change_font_size all +2.0
 map kitty_mod+plus        change_font_size all +2.0
 map kitty_mod+kp_add      change_font_size all +2.0
 map kitty_mod+minus       change_font_size all -2.0
 map kitty_mod+kp_subtract change_font_size all -2.0
 map kitty_mod+backspace   change_font_size all 0
 
 #: To setup shortcuts for specific font sizes::
 
 #:     map kitty_mod+f6 change_font_size all 10.0
 
 #: To setup shortcuts to change only the current OS window's font
 #: size::
 
 #:     map kitty_mod+f6 change_font_size current 10.0
 #: }}}
 
 #: Select and act on visible text {{{
 
 #: Use the hints kitten to select text and either pass it to an
 #: external program or insert it into the terminal or copy it to the
 #: clipboard.
 
 map kitty_mod+e kitten hints
 
 #: Open a currently visible URL using the keyboard. The program used
 #: to open the URL is specified in open_url_with.
 
 map kitty_mod+p>f kitten hints --type path --program -
 
 #: Select a path/filename and insert it into the terminal. Useful, for
 #: instance to run git commands on a filename output from a previous
 #: git command.
 
 map kitty_mod+p>shift+f kitten hints --type path
 
 #: Select a path/filename and open it with the default open program.
 
 map kitty_mod+p>l kitten hints --type line --program -
 
 #: Select a line of text and insert it into the terminal. Use for the
 #: output of things like: ls -1
 
 map kitty_mod+p>w kitten hints --type word --program -
 
 #: Select words and insert into terminal.
 
 map kitty_mod+p>h kitten hints --type hash --program -
 
 #: Select something that looks like a hash and insert it into the
 #: terminal. Useful with git, which uses sha1 hashes to identify
 #: commits
 
 map kitty_mod+p>n kitten hints --type linenum
 
 #: Select something that looks like filename:linenum and open it in
 #: vim at the specified line number.
 
 map kitty_mod+p>y kitten hints --type hyperlink
 
 #: Select a hyperlink (i.e. a URL that has been marked as such by the
 #: terminal program, for example, by ls --hyperlink=auto).
 
 
 #: The hints kitten has many more modes of operation that you can map
 #: to different shortcuts. For a full description see kittens/hints.
 #: }}}
 
 #: Miscellaneous {{{
 
 map kitty_mod+f11    toggle_fullscreen
 map kitty_mod+f10    toggle_maximized
 map kitty_mod+u      kitten unicode_input
 map kitty_mod+f2     edit_config_file
 map kitty_mod+escape kitty_shell window
 
 #: Open the kitty shell in a new window/tab/overlay/os_window to
 #: control kitty using commands.
 
 map kitty_mod+a>m    set_background_opacity +0.1
 map kitty_mod+a>l    set_background_opacity -0.1
 map kitty_mod+a>1    set_background_opacity 1
 map kitty_mod+a>d    set_background_opacity default
 map kitty_mod+delete clear_terminal reset active
 
 #: You can create shortcuts to clear/reset the terminal. For example::
 
 #:     # Reset the terminal
 #:     map kitty_mod+f9 clear_terminal reset active
 #:     # Clear the terminal screen by erasing all contents
 #:     map kitty_mod+f10 clear_terminal clear active
 #:     # Clear the terminal scrollback by erasing it
 #:     map kitty_mod+f11 clear_terminal scrollback active
 #:     # Scroll the contents of the screen into the scrollback
 #:     map kitty_mod+f12 clear_terminal scroll active
 
 #: If you want to operate on all windows instead of just the current
 #: one, use all instead of active.
 
 #: It is also possible to remap Ctrl+L to both scroll the current
 #: screen contents into the scrollback buffer and clear the screen,
 #: instead of just clearing the screen::
 
 #:     map ctrl+l combine : clear_terminal scroll active : send_text normal,application \x0c
 
 
 #: You can tell kitty to send arbitrary (UTF-8) encoded text to the
 #: client program when pressing specified shortcut keys. For example::
 
 #:     map ctrl+alt+a send_text all Special text
 
 #: This will send "Special text" when you press the ctrl+alt+a key
 #: combination.  The text to be sent is a python string literal so you
 #: can use escapes like \x1b to send control codes or \u21fb to send
 #: unicode characters (or you can just input the unicode characters
 #: directly as UTF-8 text). The first argument to send_text is the
 #: keyboard modes in which to activate the shortcut. The possible
 #: values are normal or application or kitty or a comma separated
 #: combination of them.  The special keyword all means all modes. The
 #: modes normal and application refer to the DECCKM cursor key mode
 #: for terminals, and kitty refers to the special kitty extended
 #: keyboard protocol.
 
 #: Another example, that outputs a word and then moves the cursor to
 #: the start of the line (same as pressing the Home key)::
 
 #:     map ctrl+alt+a send_text normal Word\x1b[H
 #:     map ctrl+alt+a send_text application Word\x1bOH
 
 #: }}}
 
 # }}}