/**
 ******************************************************************************
 * @file    stm32f1xx_hal_flash_ex.c
 * @author  MCD Application Team
 * @brief   Extended FLASH HAL module driver.
 *    
 *          This file provides firmware functions to manage the following 
 *          functionalities of the FLASH peripheral:
 *           + Extended Initialization/de-initialization functions
 *           + Extended I/O operation functions
 *           + Extended Peripheral Control functions 
 *         
 @verbatim
 ==============================================================================
 ##### Flash peripheral extended features  #####
 ==============================================================================
 
 ##### How to use this driver #####
 ==============================================================================
 [..] This driver provides functions to configure and program the FLASH memory 
 of all STM32F1xxx devices. It includes
 
 (++) Set/Reset the write protection
 (++) Program the user Option Bytes
 (++) Get the Read protection Level
 
 @endverbatim
 ******************************************************************************
 * @attention
 *
 * Copyright (c) 2016 STMicroelectronics.
 * All rights reserved.
 *
 * This software is licensed under terms that can be found in the LICENSE file in
 * the root directory of this software component.
 * If no LICENSE file comes with this software, it is provided AS-IS.
 ******************************************************************************
 */

/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal.h"

/** @addtogroup STM32F1xx_HAL_Driver
 * @{
 */
#ifdef HAL_FLASH_MODULE_ENABLED

/** @addtogroup FLASH
 * @{
 */
/** @addtogroup FLASH_Private_Variables
 * @{
 */
/* Variables used for Erase pages under interruption*/
extern FLASH_ProcessTypeDef pFlash;
/**
 * @}
 */

/**
 * @}
 */

/** @defgroup FLASHEx FLASHEx
 * @brief FLASH HAL Extension module driver
 * @{
 */

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants
 * @{
 */
#define FLASH_POSITION_IWDGSW_BIT        FLASH_OBR_IWDG_SW_Pos
#define FLASH_POSITION_OB_USERDATA0_BIT  FLASH_OBR_DATA0_Pos
#define FLASH_POSITION_OB_USERDATA1_BIT  FLASH_OBR_DATA1_Pos
/**
 * @}
 */

/* Private macro -------------------------------------------------------------*/
/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros
 * @{
 */
/**
 * @}
 */

/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions
 * @{
 */
/* Erase operations */
static void FLASH_MassErase(uint32_t Banks);
void FLASH_PageErase(uint32_t PageAddress);

/* Option bytes control */
static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage);
static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage);
static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel);
static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig);
static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data);
static uint32_t FLASH_OB_GetWRP(void);
static uint32_t FLASH_OB_GetRDP(void);
static uint8_t FLASH_OB_GetUser(void);

/**
 * @}
 */

/* Exported functions ---------------------------------------------------------*/
/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
 * @{
 */

/** @defgroup FLASHEx_Exported_Functions_Group1 FLASHEx Memory Erasing functions
 *  @brief   FLASH Memory Erasing functions
 *
 @verbatim   
 ==============================================================================
 ##### FLASH Erasing Programming functions ##### 
 ==============================================================================

 [..] The FLASH Memory Erasing functions, includes the following functions:
 (+) HAL_FLASHEx_Erase: return only when erase has been done
 (+) HAL_FLASHEx_Erase_IT: end of erase is done when HAL_FLASH_EndOfOperationCallback 
 is called with parameter 0xFFFFFFFF

 [..] Any operation of erase should follow these steps:
 (#) Call the HAL_FLASH_Unlock() function to enable the flash control register and 
 program memory access.
 (#) Call the desired function to erase page.
 (#) Call the HAL_FLASH_Lock() to disable the flash program memory access 
 (recommended to protect the FLASH memory against possible unwanted operation).

 @endverbatim
 * @{
 */

/**
 * @brief  Perform a mass erase or erase the specified FLASH memory pages
 * @note   To correctly run this function, the @ref HAL_FLASH_Unlock() function
 *         must be called before.
 *         Call the @ref HAL_FLASH_Lock() to disable the flash memory access 
 *         (recommended to protect the FLASH memory against possible unwanted operation)
 * @param[in]  pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
 *         contains the configuration information for the erasing.
 *
 * @param[out]  PageError pointer to variable  that
 *         contains the configuration information on faulty page in case of error
 *         (0xFFFFFFFF means that all the pages have been correctly erased)
 *
 * @retval HAL_StatusTypeDef HAL Status
 */
HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit,
        uint32_t *PageError)
{
	HAL_StatusTypeDef status = HAL_ERROR;
	uint32_t address = 0U;

	/* Process Locked */
	__HAL_LOCK(&pFlash);

	/* Check the parameters */
	assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));

	if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) {
#if defined(FLASH_BANK2_END)
    if (pEraseInit->Banks == FLASH_BANK_BOTH)
    {
      /* Mass Erase requested for Bank1 and Bank2 */
      /* Wait for last operation to be completed */
      if ((FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) && \
          (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK))
      {
        /*Mass erase to be done*/
        FLASH_MassErase(FLASH_BANK_BOTH);
        
        /* Wait for last operation to be completed */
        if ((FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) && \
            (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK))
        {
          status = HAL_OK;
        }
        
        /* If the erase operation is completed, disable the MER Bit */
        CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
        CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER);
      }
    }
    else if (pEraseInit->Banks == FLASH_BANK_2)
    {
      /* Mass Erase requested for Bank2 */
      /* Wait for last operation to be completed */
      if (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
      {
        /*Mass erase to be done*/
        FLASH_MassErase(FLASH_BANK_2);
        
        /* Wait for last operation to be completed */
        status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE);
        
        /* If the erase operation is completed, disable the MER Bit */
        CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER);
      }
    }
    else 
#endif /* FLASH_BANK2_END */
		{
			/* Mass Erase requested for Bank1 */
			/* Wait for last operation to be completed */
			if (FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE)
			        == HAL_OK) {
				/*Mass erase to be done*/
				FLASH_MassErase(FLASH_BANK_1);

				/* Wait for last operation to be completed */
				status = FLASH_WaitForLastOperation(
				        (uint32_t) FLASH_TIMEOUT_VALUE);

				/* If the erase operation is completed, disable the MER Bit */
				CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
			}
		}
	} else {
		/* Page Erase is requested */
		/* Check the parameters */
		assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
		assert_param(
		        IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));

#if defined(FLASH_BANK2_END)
    /* Page Erase requested on address located on bank2 */
    if(pEraseInit->PageAddress > FLASH_BANK1_END)
    {   
      /* Wait for last operation to be completed */
      if (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
      {
        /*Initialization of PageError variable*/
        *PageError = 0xFFFFFFFFU;
        
        /* Erase by page by page to be done*/
        for(address = pEraseInit->PageAddress;
            address < (pEraseInit->PageAddress + (pEraseInit->NbPages)*FLASH_PAGE_SIZE);
            address += FLASH_PAGE_SIZE)
        {
          FLASH_PageErase(address);
          
          /* Wait for last operation to be completed */
          status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE);
          
          /* If the erase operation is completed, disable the PER Bit */
          CLEAR_BIT(FLASH->CR2, FLASH_CR2_PER);
          
          if (status != HAL_OK)
          {
            /* In case of error, stop erase procedure and return the faulty address */
            *PageError = address;
            break;
          }
        }
      }
    }
    else
#endif /* FLASH_BANK2_END */
		{
			/* Page Erase requested on address located on bank1 */
			/* Wait for last operation to be completed */
			if (FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE)
			        == HAL_OK) {
				/*Initialization of PageError variable*/
				*PageError = 0xFFFFFFFFU;

				/* Erase page by page to be done*/
				for (address = pEraseInit->PageAddress;
				        address
				                < ((pEraseInit->NbPages * FLASH_PAGE_SIZE)
				                        + pEraseInit->PageAddress); address +=
				                FLASH_PAGE_SIZE)
				                {
					FLASH_PageErase(address);

					/* Wait for last operation to be completed */
					status = FLASH_WaitForLastOperation(
					        (uint32_t) FLASH_TIMEOUT_VALUE);

					/* If the erase operation is completed, disable the PER Bit */
					CLEAR_BIT(FLASH->CR, FLASH_CR_PER);

					if (status != HAL_OK) {
						/* In case of error, stop erase procedure and return the faulty address */
						*PageError = address;
						break;
					}
				}
			}
		}
	}

	/* Process Unlocked */
	__HAL_UNLOCK(&pFlash);

	return status;
}

/**
 * @brief  Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled
 * @note   To correctly run this function, the @ref HAL_FLASH_Unlock() function
 *         must be called before.
 *         Call the @ref HAL_FLASH_Lock() to disable the flash memory access 
 *         (recommended to protect the FLASH memory against possible unwanted operation)
 * @param  pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
 *         contains the configuration information for the erasing.
 *
 * @retval HAL_StatusTypeDef HAL Status
 */
HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
{
	HAL_StatusTypeDef status = HAL_OK;

	/* If procedure already ongoing, reject the next one */
	if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE) {
		return HAL_ERROR;
	}

	/* Check the parameters */
	assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));

	/* Enable End of FLASH Operation and Error source interrupts */
	__HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);

#if defined(FLASH_BANK2_END)
  /* Enable End of FLASH Operation and Error source interrupts */
  __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP_BANK2 | FLASH_IT_ERR_BANK2);
  
#endif
	if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) {
		/*Mass erase to be done*/
		pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
		FLASH_MassErase(pEraseInit->Banks);
	} else {
		/* Erase by page to be done*/

		/* Check the parameters */
		assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
		assert_param(
		        IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));

		pFlash.ProcedureOnGoing = FLASH_PROC_PAGEERASE;
		pFlash.DataRemaining = pEraseInit->NbPages;
		pFlash.Address = pEraseInit->PageAddress;

		/*Erase 1st page and wait for IT*/
		FLASH_PageErase(pEraseInit->PageAddress);
	}

	return status;
}

/**
 * @}
 */

/** @defgroup FLASHEx_Exported_Functions_Group2 Option Bytes Programming functions
 *  @brief   Option Bytes Programming functions
 *
 @verbatim   
 ==============================================================================
 ##### Option Bytes Programming functions ##### 
 ==============================================================================  
 [..]
 This subsection provides a set of functions allowing to control the FLASH 
 option bytes operations.

 @endverbatim
 * @{
 */

/**
 * @brief  Erases the FLASH option bytes.
 * @note   This functions erases all option bytes except the Read protection (RDP).
 *         The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
 *         The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
 *         The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
 *         (system reset will occur)
 * @retval HAL status
 */

HAL_StatusTypeDef HAL_FLASHEx_OBErase(void)
{
	uint8_t rdptmp = OB_RDP_LEVEL_0;
	HAL_StatusTypeDef status = HAL_ERROR;

	/* Get the actual read protection Option Byte value */
	rdptmp = FLASH_OB_GetRDP();

	/* Wait for last operation to be completed */
	status = FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE);

	if (status == HAL_OK) {
		/* Clean the error context */
		pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

		/* If the previous operation is completed, proceed to erase the option bytes */
		SET_BIT(FLASH->CR, FLASH_CR_OPTER);
		SET_BIT(FLASH->CR, FLASH_CR_STRT);

		/* Wait for last operation to be completed */
		status = FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE);

		/* If the erase operation is completed, disable the OPTER Bit */
		CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER);

		if (status == HAL_OK) {
			/* Restore the last read protection Option Byte value */
			status = FLASH_OB_RDP_LevelConfig(rdptmp);
		}
	}

	/* Return the erase status */
	return status;
}

/**
 * @brief  Program option bytes
 * @note   The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
 *         The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
 *         The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
 *         (system reset will occur)
 *
 * @param  pOBInit pointer to an FLASH_OBInitStruct structure that
 *         contains the configuration information for the programming.
 *
 * @retval HAL_StatusTypeDef HAL Status
 */
HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
{
	HAL_StatusTypeDef status = HAL_ERROR;

	/* Process Locked */
	__HAL_LOCK(&pFlash);

	/* Check the parameters */
	assert_param(IS_OPTIONBYTE(pOBInit->OptionType));

	/* Write protection configuration */
	if ((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) {
		assert_param(IS_WRPSTATE(pOBInit->WRPState));
		if (pOBInit->WRPState == OB_WRPSTATE_ENABLE) {
			/* Enable of Write protection on the selected page */
			status = FLASH_OB_EnableWRP(pOBInit->WRPPage);
		} else {
			/* Disable of Write protection on the selected page */
			status = FLASH_OB_DisableWRP(pOBInit->WRPPage);
		}
		if (status != HAL_OK) {
			/* Process Unlocked */
			__HAL_UNLOCK(&pFlash);
			return status;
		}
	}

	/* Read protection configuration */
	if ((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP) {
		status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
		if (status != HAL_OK) {
			/* Process Unlocked */
			__HAL_UNLOCK(&pFlash);
			return status;
		}
	}

	/* USER configuration */
	if ((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER) {
		status = FLASH_OB_UserConfig(pOBInit->USERConfig);
		if (status != HAL_OK) {
			/* Process Unlocked */
			__HAL_UNLOCK(&pFlash);
			return status;
		}
	}

	/* DATA configuration*/
	if ((pOBInit->OptionType & OPTIONBYTE_DATA) == OPTIONBYTE_DATA) {
		status = FLASH_OB_ProgramData(pOBInit->DATAAddress, pOBInit->DATAData);
		if (status != HAL_OK) {
			/* Process Unlocked */
			__HAL_UNLOCK(&pFlash);
			return status;
		}
	}

	/* Process Unlocked */
	__HAL_UNLOCK(&pFlash);

	return status;
}

/**
 * @brief  Get the Option byte configuration
 * @param  pOBInit pointer to an FLASH_OBInitStruct structure that
 *         contains the configuration information for the programming.
 *
 * @retval None
 */
void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
{
	pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER;

	/*Get WRP*/
	pOBInit->WRPPage = FLASH_OB_GetWRP();

	/*Get RDP Level*/
	pOBInit->RDPLevel = FLASH_OB_GetRDP();

	/*Get USER*/
	pOBInit->USERConfig = FLASH_OB_GetUser();
}

/**
 * @brief  Get the Option byte user data
 * @param  DATAAdress Address of the option byte DATA
 *          This parameter can be one of the following values:
 *            @arg @ref OB_DATA_ADDRESS_DATA0
 *            @arg @ref OB_DATA_ADDRESS_DATA1
 * @retval Value programmed in USER data
 */
uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress)
{
	uint32_t value = 0;

	if (DATAAdress == OB_DATA_ADDRESS_DATA0) {
		/* Get value programmed in OB USER Data0 */
		value = READ_BIT(FLASH->OBR,
		        FLASH_OBR_DATA0) >> FLASH_POSITION_OB_USERDATA0_BIT;
	} else {
		/* Get value programmed in OB USER Data1 */
		value = READ_BIT(FLASH->OBR,
		        FLASH_OBR_DATA1) >> FLASH_POSITION_OB_USERDATA1_BIT;
	}

	return value;
}

/**
 * @}
 */

/**
 * @}
 */

/** @addtogroup FLASHEx_Private_Functions
 * @{
 */

/**
 * @brief  Full erase of FLASH memory Bank 
 * @param  Banks Banks to be erased
 *          This parameter can be one of the following values:
 *            @arg @ref FLASH_BANK_1 Bank1 to be erased
 @if STM32F101xG
 *            @arg @ref FLASH_BANK_2 Bank2 to be erased
 *            @arg @ref FLASH_BANK_BOTH Bank1 and Bank2 to be erased
 @endif
 @if STM32F103xG
 *            @arg @ref FLASH_BANK_2 Bank2 to be erased
 *            @arg @ref FLASH_BANK_BOTH Bank1 and Bank2 to be erased
 @endif
 *
 * @retval None
 */
static void FLASH_MassErase(uint32_t Banks)
{
	/* Check the parameters */
	assert_param(IS_FLASH_BANK(Banks));

	/* Clean the error context */
	pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

#if defined(FLASH_BANK2_END)
  if(Banks == FLASH_BANK_BOTH)
  {
    /* bank1 & bank2 will be erased*/
    SET_BIT(FLASH->CR, FLASH_CR_MER);
    SET_BIT(FLASH->CR2, FLASH_CR2_MER);
    SET_BIT(FLASH->CR, FLASH_CR_STRT);
    SET_BIT(FLASH->CR2, FLASH_CR2_STRT);
  }
  else if(Banks == FLASH_BANK_2)
  {
    /*Only bank2 will be erased*/
    SET_BIT(FLASH->CR2, FLASH_CR2_MER);
    SET_BIT(FLASH->CR2, FLASH_CR2_STRT);
  }
  else
  {
#endif /* FLASH_BANK2_END */
#if !defined(FLASH_BANK2_END)
	/* Prevent unused argument(s) compilation warning */
	UNUSED(Banks);
#endif /* FLASH_BANK2_END */  
	/* Only bank1 will be erased*/
	SET_BIT(FLASH->CR, FLASH_CR_MER);
	SET_BIT(FLASH->CR, FLASH_CR_STRT);
#if defined(FLASH_BANK2_END)
  }
#endif /* FLASH_BANK2_END */
}

/**
 * @brief  Enable the write protection of the desired pages
 * @note   An option byte erase is done automatically in this function. 
 * @note   When the memory read protection level is selected (RDP level = 1), 
 *         it is not possible to program or erase the flash page i if
 *         debug features are connected or boot code is executed in RAM, even if nWRPi = 1 
 * 
 * @param  WriteProtectPage specifies the page(s) to be write protected.
 *         The value of this parameter depend on device used within the same series 
 * @retval HAL status 
 */
static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage)
{
	HAL_StatusTypeDef status = HAL_OK;
	uint16_t WRP0_Data = 0xFFFF;
#if defined(FLASH_WRP1_WRP1)
	uint16_t WRP1_Data = 0xFFFF;
#endif /* FLASH_WRP1_WRP1 */
#if defined(FLASH_WRP2_WRP2)
	uint16_t WRP2_Data = 0xFFFF;
#endif /* FLASH_WRP2_WRP2 */
#if defined(FLASH_WRP3_WRP3)
	uint16_t WRP3_Data = 0xFFFF;
#endif /* FLASH_WRP3_WRP3 */

	/* Check the parameters */
	assert_param(IS_OB_WRP(WriteProtectPage));

	/* Get current write protected pages and the new pages to be protected ******/
	WriteProtectPage = (uint32_t) (~((~FLASH_OB_GetWRP()) | WriteProtectPage));

#if defined(OB_WRP_PAGES0TO15MASK)
  WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
#elif defined(OB_WRP_PAGES0TO31MASK)
	WRP0_Data = (uint16_t) (WriteProtectPage & OB_WRP_PAGES0TO31MASK);
#endif /* OB_WRP_PAGES0TO31MASK */

#if defined(OB_WRP_PAGES16TO31MASK)
  WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U);
#elif defined(OB_WRP_PAGES32TO63MASK)
	WRP1_Data = (uint16_t) ((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8U);
#endif /* OB_WRP_PAGES32TO63MASK */

#if defined(OB_WRP_PAGES64TO95MASK)
	WRP2_Data = (uint16_t) ((WriteProtectPage & OB_WRP_PAGES64TO95MASK) >> 16U);
#endif /* OB_WRP_PAGES64TO95MASK */
#if defined(OB_WRP_PAGES32TO47MASK)
  WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U);
#endif /* OB_WRP_PAGES32TO47MASK */

#if defined(OB_WRP_PAGES96TO127MASK)
	WRP3_Data =
	        (uint16_t) ((WriteProtectPage & OB_WRP_PAGES96TO127MASK) >> 24U);
#elif defined(OB_WRP_PAGES48TO255MASK)
  WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24U); 
#elif defined(OB_WRP_PAGES48TO511MASK)
  WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO511MASK) >> 24U); 
#elif defined(OB_WRP_PAGES48TO127MASK)
  WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U); 
#endif /* OB_WRP_PAGES96TO127MASK */

	/* Wait for last operation to be completed */
	status = FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE);

	if (status == HAL_OK) {
		/* Clean the error context */
		pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

		/* To be able to write again option byte, need to perform a option byte erase */
		status = HAL_FLASHEx_OBErase();
		if (status == HAL_OK) {
			/* Enable write protection */
			SET_BIT(FLASH->CR, FLASH_CR_OPTPG);

#if defined(FLASH_WRP0_WRP0)
			if (WRP0_Data != 0xFFU) {
				OB->WRP0 &= WRP0_Data;

				/* Wait for last operation to be completed */
				status = FLASH_WaitForLastOperation(
				        (uint32_t) FLASH_TIMEOUT_VALUE);
			}
#endif /* FLASH_WRP0_WRP0 */

#if defined(FLASH_WRP1_WRP1)
			if ((status == HAL_OK) && (WRP1_Data != 0xFFU)) {
				OB->WRP1 &= WRP1_Data;

				/* Wait for last operation to be completed */
				status = FLASH_WaitForLastOperation(
				        (uint32_t) FLASH_TIMEOUT_VALUE);
			}
#endif /* FLASH_WRP1_WRP1 */

#if defined(FLASH_WRP2_WRP2)
			if ((status == HAL_OK) && (WRP2_Data != 0xFFU)) {
				OB->WRP2 &= WRP2_Data;

				/* Wait for last operation to be completed */
				status = FLASH_WaitForLastOperation(
				        (uint32_t) FLASH_TIMEOUT_VALUE);
			}
#endif /* FLASH_WRP2_WRP2 */

#if defined(FLASH_WRP3_WRP3)
			if ((status == HAL_OK) && (WRP3_Data != 0xFFU)) {
				OB->WRP3 &= WRP3_Data;

				/* Wait for last operation to be completed */
				status = FLASH_WaitForLastOperation(
				        (uint32_t) FLASH_TIMEOUT_VALUE);
			}
#endif /* FLASH_WRP3_WRP3 */

			/* if the program operation is completed, disable the OPTPG Bit */
			CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
		}
	}

	return status;
}

/**
 * @brief  Disable the write protection of the desired pages
 * @note   An option byte erase is done automatically in this function. 
 * @note   When the memory read protection level is selected (RDP level = 1), 
 *         it is not possible to program or erase the flash page i if   
 *         debug features are connected or boot code is executed in RAM, even if nWRPi = 1 
 * 
 * @param  WriteProtectPage specifies the page(s) to be write unprotected.
 *         The value of this parameter depend on device used within the same series 
 * @retval HAL status 
 */
static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage)
{
	HAL_StatusTypeDef status = HAL_OK;
	uint16_t WRP0_Data = 0xFFFF;
#if defined(FLASH_WRP1_WRP1)
	uint16_t WRP1_Data = 0xFFFF;
#endif /* FLASH_WRP1_WRP1 */
#if defined(FLASH_WRP2_WRP2)
	uint16_t WRP2_Data = 0xFFFF;
#endif /* FLASH_WRP2_WRP2 */
#if defined(FLASH_WRP3_WRP3)
	uint16_t WRP3_Data = 0xFFFF;
#endif /* FLASH_WRP3_WRP3 */

	/* Check the parameters */
	assert_param(IS_OB_WRP(WriteProtectPage));

	/* Get current write protected pages and the new pages to be unprotected ******/
	WriteProtectPage = (FLASH_OB_GetWRP() | WriteProtectPage);

#if defined(OB_WRP_PAGES0TO15MASK)
  WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
#elif defined(OB_WRP_PAGES0TO31MASK)
	WRP0_Data = (uint16_t) (WriteProtectPage & OB_WRP_PAGES0TO31MASK);
#endif /* OB_WRP_PAGES0TO31MASK */

#if defined(OB_WRP_PAGES16TO31MASK)
  WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8U);
#elif defined(OB_WRP_PAGES32TO63MASK)
	WRP1_Data = (uint16_t) ((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8U);
#endif /* OB_WRP_PAGES32TO63MASK */

#if defined(OB_WRP_PAGES64TO95MASK)
	WRP2_Data = (uint16_t) ((WriteProtectPage & OB_WRP_PAGES64TO95MASK) >> 16U);
#endif /* OB_WRP_PAGES64TO95MASK */
#if defined(OB_WRP_PAGES32TO47MASK)
  WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16U);
#endif /* OB_WRP_PAGES32TO47MASK */

#if defined(OB_WRP_PAGES96TO127MASK)
	WRP3_Data =
	        (uint16_t) ((WriteProtectPage & OB_WRP_PAGES96TO127MASK) >> 24U);
#elif defined(OB_WRP_PAGES48TO255MASK)
  WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24U); 
#elif defined(OB_WRP_PAGES48TO511MASK)
  WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO511MASK) >> 24U); 
#elif defined(OB_WRP_PAGES48TO127MASK)
  WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24U); 
#endif /* OB_WRP_PAGES96TO127MASK */

	/* Wait for last operation to be completed */
	status = FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE);

	if (status == HAL_OK) {
		/* Clean the error context */
		pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

		/* To be able to write again option byte, need to perform a option byte erase */
		status = HAL_FLASHEx_OBErase();
		if (status == HAL_OK) {
			SET_BIT(FLASH->CR, FLASH_CR_OPTPG);

#if defined(FLASH_WRP0_WRP0)
			if (WRP0_Data != 0xFFU) {
				OB->WRP0 |= WRP0_Data;

				/* Wait for last operation to be completed */
				status = FLASH_WaitForLastOperation(
				        (uint32_t) FLASH_TIMEOUT_VALUE);
			}
#endif /* FLASH_WRP0_WRP0 */

#if defined(FLASH_WRP1_WRP1)
			if ((status == HAL_OK) && (WRP1_Data != 0xFFU)) {
				OB->WRP1 |= WRP1_Data;

				/* Wait for last operation to be completed */
				status = FLASH_WaitForLastOperation(
				        (uint32_t) FLASH_TIMEOUT_VALUE);
			}
#endif /* FLASH_WRP1_WRP1 */

#if defined(FLASH_WRP2_WRP2)
			if ((status == HAL_OK) && (WRP2_Data != 0xFFU)) {
				OB->WRP2 |= WRP2_Data;

				/* Wait for last operation to be completed */
				status = FLASH_WaitForLastOperation(
				        (uint32_t) FLASH_TIMEOUT_VALUE);
			}
#endif /* FLASH_WRP2_WRP2 */

#if defined(FLASH_WRP3_WRP3)
			if ((status == HAL_OK) && (WRP3_Data != 0xFFU)) {
				OB->WRP3 |= WRP3_Data;

				/* Wait for last operation to be completed */
				status = FLASH_WaitForLastOperation(
				        (uint32_t) FLASH_TIMEOUT_VALUE);
			}
#endif /* FLASH_WRP3_WRP3 */

			/* if the program operation is completed, disable the OPTPG Bit */
			CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
		}
	}
	return status;
}

/**
 * @brief  Set the read protection level.
 * @param  ReadProtectLevel specifies the read protection level.
 *         This parameter can be one of the following values:
 *            @arg @ref OB_RDP_LEVEL_0 No protection
 *            @arg @ref OB_RDP_LEVEL_1 Read protection of the memory
 * @retval HAL status
 */
static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel)
{
	HAL_StatusTypeDef status = HAL_OK;

	/* Check the parameters */
	assert_param(IS_OB_RDP_LEVEL(ReadProtectLevel));

	/* Wait for last operation to be completed */
	status = FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE);

	if (status == HAL_OK) {
		/* Clean the error context */
		pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

		/* If the previous operation is completed, proceed to erase the option bytes */
		SET_BIT(FLASH->CR, FLASH_CR_OPTER);
		SET_BIT(FLASH->CR, FLASH_CR_STRT);

		/* Wait for last operation to be completed */
		status = FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE);

		/* If the erase operation is completed, disable the OPTER Bit */
		CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER);

		if (status == HAL_OK) {
			/* Enable the Option Bytes Programming operation */
			SET_BIT(FLASH->CR, FLASH_CR_OPTPG);

			WRITE_REG(OB->RDP, ReadProtectLevel);

			/* Wait for last operation to be completed */
			status = FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE);

			/* if the program operation is completed, disable the OPTPG Bit */
			CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
		}
	}

	return status;
}

/**
 * @brief  Program the FLASH User Option Byte.    
 * @note   Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
 * @param  UserConfig The FLASH User Option Bytes values FLASH_OBR_IWDG_SW(Bit2), 
 *         FLASH_OBR_nRST_STOP(Bit3),FLASH_OBR_nRST_STDBY(Bit4).
 *         And BFBF2(Bit5) for STM32F101xG and STM32F103xG . 
 * @retval HAL status
 */
static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig)
{
	HAL_StatusTypeDef status = HAL_OK;

	/* Check the parameters */
	assert_param(IS_OB_IWDG_SOURCE((UserConfig&OB_IWDG_SW)));
	assert_param(IS_OB_STOP_SOURCE((UserConfig&OB_STOP_NO_RST)));
	assert_param(IS_OB_STDBY_SOURCE((UserConfig&OB_STDBY_NO_RST)));
#if defined(FLASH_BANK2_END)
  assert_param(IS_OB_BOOT1((UserConfig&OB_BOOT1_SET)));
#endif /* FLASH_BANK2_END */

	/* Wait for last operation to be completed */
	status = FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE);

	if (status == HAL_OK) {
		/* Clean the error context */
		pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

		/* Enable the Option Bytes Programming operation */
		SET_BIT(FLASH->CR, FLASH_CR_OPTPG);

#if defined(FLASH_BANK2_END)
		OB->USER = (UserConfig | 0xF0U);
#else
		OB->USER = (UserConfig | 0x88U);
#endif /* FLASH_BANK2_END */

		/* Wait for last operation to be completed */
		status = FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE);

		/* if the program operation is completed, disable the OPTPG Bit */
		CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
	}

	return status;
}

/**
 * @brief  Programs a half word at a specified Option Byte Data address.
 * @note   The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
 *         The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
 *         The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes 
 *         (system reset will occur)
 *         Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
 * @param  Address specifies the address to be programmed.
 *         This parameter can be 0x1FFFF804 or 0x1FFFF806. 
 * @param  Data specifies the data to be programmed.
 * @retval HAL status
 */
static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data)
{
	HAL_StatusTypeDef status = HAL_ERROR;

	/* Check the parameters */
	assert_param(IS_OB_DATA_ADDRESS(Address));

	/* Wait for last operation to be completed */
	status = FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE);

	if (status == HAL_OK) {
		/* Clean the error context */
		pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

		/* Enables the Option Bytes Programming operation */
		SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
		*(__IO uint16_t*) Address = Data;

		/* Wait for last operation to be completed */
		status = FLASH_WaitForLastOperation((uint32_t) FLASH_TIMEOUT_VALUE);

		/* If the program operation is completed, disable the OPTPG Bit */
		CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
	}
	/* Return the Option Byte Data Program Status */
	return status;
}

/**
 * @brief  Return the FLASH Write Protection Option Bytes value.
 * @retval The FLASH Write Protection Option Bytes value
 */
static uint32_t FLASH_OB_GetWRP(void)
{
	/* Return the FLASH write protection Register value */
	return (uint32_t) (READ_REG(FLASH->WRPR));
}

/**
 * @brief  Returns the FLASH Read Protection level.
 * @retval FLASH RDP level
 *         This parameter can be one of the following values:
 *            @arg @ref OB_RDP_LEVEL_0 No protection
 *            @arg @ref OB_RDP_LEVEL_1 Read protection of the memory
 */
static uint32_t FLASH_OB_GetRDP(void)
{
	uint32_t readstatus = OB_RDP_LEVEL_0;
	uint32_t tmp_reg = 0U;

	/* Read RDP level bits */
	tmp_reg = READ_BIT(FLASH->OBR, FLASH_OBR_RDPRT);

	if (tmp_reg == FLASH_OBR_RDPRT) {
		readstatus = OB_RDP_LEVEL_1;
	} else {
		readstatus = OB_RDP_LEVEL_0;
	}

	return readstatus;
}

/**
 * @brief  Return the FLASH User Option Byte value.
 * @retval The FLASH User Option Bytes values: FLASH_OBR_IWDG_SW(Bit2), 
 *         FLASH_OBR_nRST_STOP(Bit3),FLASH_OBR_nRST_STDBY(Bit4).
 *         And FLASH_OBR_BFB2(Bit5) for STM32F101xG and STM32F103xG . 
 */
static uint8_t FLASH_OB_GetUser(void)
{
	/* Return the User Option Byte */
	return (uint8_t) ((READ_REG(FLASH->OBR) & FLASH_OBR_USER)
	        >> FLASH_POSITION_IWDGSW_BIT);
}

/**
 * @}
 */

/**
 * @}
 */

/** @addtogroup FLASH
 * @{
 */

/** @addtogroup FLASH_Private_Functions
 * @{
 */

/**
 * @brief  Erase the specified FLASH memory page
 * @param  PageAddress FLASH page to erase
 *         The value of this parameter depend on device used within the same series      
 * 
 * @retval None
 */
void FLASH_PageErase(uint32_t PageAddress)
{
	/* Clean the error context */
	pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

#if defined(FLASH_BANK2_END)
  if(PageAddress > FLASH_BANK1_END)
  { 
    /* Proceed to erase the page */
    SET_BIT(FLASH->CR2, FLASH_CR2_PER);
    WRITE_REG(FLASH->AR2, PageAddress);
    SET_BIT(FLASH->CR2, FLASH_CR2_STRT);
  }
  else
  {
#endif /* FLASH_BANK2_END */
	/* Proceed to erase the page */
	SET_BIT(FLASH->CR, FLASH_CR_PER);
	WRITE_REG(FLASH->AR, PageAddress);
	SET_BIT(FLASH->CR, FLASH_CR_STRT);
#if defined(FLASH_BANK2_END)
  }
#endif /* FLASH_BANK2_END */
}

/**
 * @}
 */

/**
 * @}
 */

#endif /* HAL_FLASH_MODULE_ENABLED */
/**
 * @}
 */