Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_exti.h (31117B)
1 /** 2 ****************************************************************************** 3 * @file stm32f1xx_ll_exti.h 4 * @author MCD Application Team 5 * @brief Header file of EXTI LL module. 6 ****************************************************************************** 7 * @attention 8 * 9 * Copyright (c) 2016 STMicroelectronics. 10 * All rights reserved. 11 * 12 * This software is licensed under terms that can be found in the LICENSE file 13 * in the root directory of this software component. 14 * If no LICENSE file comes with this software, it is provided AS-IS. 15 * 16 ****************************************************************************** 17 */ 18 19 /* Define to prevent recursive inclusion -------------------------------------*/ 20 #ifndef STM32F1xx_LL_EXTI_H 21 #define STM32F1xx_LL_EXTI_H 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif 26 27 /* Includes ------------------------------------------------------------------*/ 28 #include "stm32f1xx.h" 29 30 /** @addtogroup STM32F1xx_LL_Driver 31 * @{ 32 */ 33 34 #if defined (EXTI) 35 36 /** @defgroup EXTI_LL EXTI 37 * @{ 38 */ 39 40 /* Private types -------------------------------------------------------------*/ 41 /* Private variables ---------------------------------------------------------*/ 42 /* Private constants ---------------------------------------------------------*/ 43 /* Private Macros ------------------------------------------------------------*/ 44 #if defined(USE_FULL_LL_DRIVER) 45 /** @defgroup EXTI_LL_Private_Macros EXTI Private Macros 46 * @{ 47 */ 48 /** 49 * @} 50 */ 51 #endif /*USE_FULL_LL_DRIVER*/ 52 /* Exported types ------------------------------------------------------------*/ 53 #if defined(USE_FULL_LL_DRIVER) 54 /** @defgroup EXTI_LL_ES_INIT EXTI Exported Init structure 55 * @{ 56 */ 57 typedef struct 58 { 59 60 uint32_t Line_0_31; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 0 to 31 61 This parameter can be any combination of @ref EXTI_LL_EC_LINE */ 62 63 FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. 64 This parameter can be set either to ENABLE or DISABLE */ 65 66 uint8_t Mode; /*!< Specifies the mode for the EXTI lines. 67 This parameter can be a value of @ref EXTI_LL_EC_MODE. */ 68 69 uint8_t Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. 70 This parameter can be a value of @ref EXTI_LL_EC_TRIGGER. */ 71 }LL_EXTI_InitTypeDef; 72 73 /** 74 * @} 75 */ 76 #endif /*USE_FULL_LL_DRIVER*/ 77 78 /* Exported constants --------------------------------------------------------*/ 79 /** @defgroup EXTI_LL_Exported_Constants EXTI Exported Constants 80 * @{ 81 */ 82 83 /** @defgroup EXTI_LL_EC_LINE LINE 84 * @{ 85 */ 86 #define LL_EXTI_LINE_0 EXTI_IMR_IM0 /*!< Extended line 0 */ 87 #define LL_EXTI_LINE_1 EXTI_IMR_IM1 /*!< Extended line 1 */ 88 #define LL_EXTI_LINE_2 EXTI_IMR_IM2 /*!< Extended line 2 */ 89 #define LL_EXTI_LINE_3 EXTI_IMR_IM3 /*!< Extended line 3 */ 90 #define LL_EXTI_LINE_4 EXTI_IMR_IM4 /*!< Extended line 4 */ 91 #define LL_EXTI_LINE_5 EXTI_IMR_IM5 /*!< Extended line 5 */ 92 #define LL_EXTI_LINE_6 EXTI_IMR_IM6 /*!< Extended line 6 */ 93 #define LL_EXTI_LINE_7 EXTI_IMR_IM7 /*!< Extended line 7 */ 94 #define LL_EXTI_LINE_8 EXTI_IMR_IM8 /*!< Extended line 8 */ 95 #define LL_EXTI_LINE_9 EXTI_IMR_IM9 /*!< Extended line 9 */ 96 #define LL_EXTI_LINE_10 EXTI_IMR_IM10 /*!< Extended line 10 */ 97 #define LL_EXTI_LINE_11 EXTI_IMR_IM11 /*!< Extended line 11 */ 98 #define LL_EXTI_LINE_12 EXTI_IMR_IM12 /*!< Extended line 12 */ 99 #define LL_EXTI_LINE_13 EXTI_IMR_IM13 /*!< Extended line 13 */ 100 #define LL_EXTI_LINE_14 EXTI_IMR_IM14 /*!< Extended line 14 */ 101 #define LL_EXTI_LINE_15 EXTI_IMR_IM15 /*!< Extended line 15 */ 102 #if defined(EXTI_IMR_IM16) 103 #define LL_EXTI_LINE_16 EXTI_IMR_IM16 /*!< Extended line 16 */ 104 #endif 105 #define LL_EXTI_LINE_17 EXTI_IMR_IM17 /*!< Extended line 17 */ 106 #if defined(EXTI_IMR_IM18) 107 #define LL_EXTI_LINE_18 EXTI_IMR_IM18 /*!< Extended line 18 */ 108 #endif 109 #if defined(EXTI_IMR_IM19) 110 #define LL_EXTI_LINE_19 EXTI_IMR_IM19 /*!< Extended line 19 */ 111 #endif 112 #if defined(EXTI_IMR_IM20) 113 #define LL_EXTI_LINE_20 EXTI_IMR_IM20 /*!< Extended line 20 */ 114 #endif 115 #if defined(EXTI_IMR_IM21) 116 #define LL_EXTI_LINE_21 EXTI_IMR_IM21 /*!< Extended line 21 */ 117 #endif 118 #if defined(EXTI_IMR_IM22) 119 #define LL_EXTI_LINE_22 EXTI_IMR_IM22 /*!< Extended line 22 */ 120 #endif 121 #if defined(EXTI_IMR_IM23) 122 #define LL_EXTI_LINE_23 EXTI_IMR_IM23 /*!< Extended line 23 */ 123 #endif 124 #if defined(EXTI_IMR_IM24) 125 #define LL_EXTI_LINE_24 EXTI_IMR_IM24 /*!< Extended line 24 */ 126 #endif 127 #if defined(EXTI_IMR_IM25) 128 #define LL_EXTI_LINE_25 EXTI_IMR_IM25 /*!< Extended line 25 */ 129 #endif 130 #if defined(EXTI_IMR_IM26) 131 #define LL_EXTI_LINE_26 EXTI_IMR_IM26 /*!< Extended line 26 */ 132 #endif 133 #if defined(EXTI_IMR_IM27) 134 #define LL_EXTI_LINE_27 EXTI_IMR_IM27 /*!< Extended line 27 */ 135 #endif 136 #if defined(EXTI_IMR_IM28) 137 #define LL_EXTI_LINE_28 EXTI_IMR_IM28 /*!< Extended line 28 */ 138 #endif 139 #if defined(EXTI_IMR_IM29) 140 #define LL_EXTI_LINE_29 EXTI_IMR_IM29 /*!< Extended line 29 */ 141 #endif 142 #if defined(EXTI_IMR_IM30) 143 #define LL_EXTI_LINE_30 EXTI_IMR_IM30 /*!< Extended line 30 */ 144 #endif 145 #if defined(EXTI_IMR_IM31) 146 #define LL_EXTI_LINE_31 EXTI_IMR_IM31 /*!< Extended line 31 */ 147 #endif 148 #define LL_EXTI_LINE_ALL_0_31 EXTI_IMR_IM /*!< All Extended line not reserved*/ 149 150 #define LL_EXTI_LINE_ALL (0xFFFFFFFFU) /*!< All Extended line */ 151 152 #if defined(USE_FULL_LL_DRIVER) 153 #define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */ 154 #endif /*USE_FULL_LL_DRIVER*/ 155 156 /** 157 * @} 158 */ 159 #if defined(USE_FULL_LL_DRIVER) 160 161 /** @defgroup EXTI_LL_EC_MODE Mode 162 * @{ 163 */ 164 #define LL_EXTI_MODE_IT ((uint8_t)0x00) /*!< Interrupt Mode */ 165 #define LL_EXTI_MODE_EVENT ((uint8_t)0x01) /*!< Event Mode */ 166 #define LL_EXTI_MODE_IT_EVENT ((uint8_t)0x02) /*!< Interrupt & Event Mode */ 167 /** 168 * @} 169 */ 170 171 /** @defgroup EXTI_LL_EC_TRIGGER Edge Trigger 172 * @{ 173 */ 174 #define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00) /*!< No Trigger Mode */ 175 #define LL_EXTI_TRIGGER_RISING ((uint8_t)0x01) /*!< Trigger Rising Mode */ 176 #define LL_EXTI_TRIGGER_FALLING ((uint8_t)0x02) /*!< Trigger Falling Mode */ 177 #define LL_EXTI_TRIGGER_RISING_FALLING ((uint8_t)0x03) /*!< Trigger Rising & Falling Mode */ 178 179 /** 180 * @} 181 */ 182 183 #endif /*USE_FULL_LL_DRIVER*/ 184 185 /** 186 * @} 187 */ 188 189 /* Exported macro ------------------------------------------------------------*/ 190 /** @defgroup EXTI_LL_Exported_Macros EXTI Exported Macros 191 * @{ 192 */ 193 194 /** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros 195 * @{ 196 */ 197 198 /** 199 * @brief Write a value in EXTI register 200 * @param __REG__ Register to be written 201 * @param __VALUE__ Value to be written in the register 202 * @retval None 203 */ 204 #define LL_EXTI_WriteReg(__REG__, __VALUE__) WRITE_REG(EXTI->__REG__, (__VALUE__)) 205 206 /** 207 * @brief Read a value in EXTI register 208 * @param __REG__ Register to be read 209 * @retval Register value 210 */ 211 #define LL_EXTI_ReadReg(__REG__) READ_REG(EXTI->__REG__) 212 /** 213 * @} 214 */ 215 216 /** 217 * @} 218 */ 219 220 /* Exported functions --------------------------------------------------------*/ 221 /** @defgroup EXTI_LL_Exported_Functions EXTI Exported Functions 222 * @{ 223 */ 224 /** @defgroup EXTI_LL_EF_IT_Management IT_Management 225 * @{ 226 */ 227 228 /** 229 * @brief Enable ExtiLine Interrupt request for Lines in range 0 to 31 230 * @note The reset value for the direct or internal lines (see RM) 231 * is set to 1 in order to enable the interrupt by default. 232 * Bits are set automatically at Power on. 233 * @rmtoll IMR IMx LL_EXTI_EnableIT_0_31 234 * @param ExtiLine This parameter can be one of the following values: 235 * @arg @ref LL_EXTI_LINE_0 236 * @arg @ref LL_EXTI_LINE_1 237 * @arg @ref LL_EXTI_LINE_2 238 * @arg @ref LL_EXTI_LINE_3 239 * @arg @ref LL_EXTI_LINE_4 240 * @arg @ref LL_EXTI_LINE_5 241 * @arg @ref LL_EXTI_LINE_6 242 * @arg @ref LL_EXTI_LINE_7 243 * @arg @ref LL_EXTI_LINE_8 244 * @arg @ref LL_EXTI_LINE_9 245 * @arg @ref LL_EXTI_LINE_10 246 * @arg @ref LL_EXTI_LINE_11 247 * @arg @ref LL_EXTI_LINE_12 248 * @arg @ref LL_EXTI_LINE_13 249 * @arg @ref LL_EXTI_LINE_14 250 * @arg @ref LL_EXTI_LINE_15 251 * @arg @ref LL_EXTI_LINE_16 252 * @arg @ref LL_EXTI_LINE_17 253 * @arg @ref LL_EXTI_LINE_18 254 * @arg @ref LL_EXTI_LINE_19 255 * @arg @ref LL_EXTI_LINE_ALL_0_31 256 * @note Please check each device line mapping for EXTI Line availability 257 * @retval None 258 */ 259 __STATIC_INLINE void LL_EXTI_EnableIT_0_31(uint32_t ExtiLine) 260 { 261 SET_BIT(EXTI->IMR, ExtiLine); 262 } 263 264 /** 265 * @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31 266 * @note The reset value for the direct or internal lines (see RM) 267 * is set to 1 in order to enable the interrupt by default. 268 * Bits are set automatically at Power on. 269 * @rmtoll IMR IMx LL_EXTI_DisableIT_0_31 270 * @param ExtiLine This parameter can be one of the following values: 271 * @arg @ref LL_EXTI_LINE_0 272 * @arg @ref LL_EXTI_LINE_1 273 * @arg @ref LL_EXTI_LINE_2 274 * @arg @ref LL_EXTI_LINE_3 275 * @arg @ref LL_EXTI_LINE_4 276 * @arg @ref LL_EXTI_LINE_5 277 * @arg @ref LL_EXTI_LINE_6 278 * @arg @ref LL_EXTI_LINE_7 279 * @arg @ref LL_EXTI_LINE_8 280 * @arg @ref LL_EXTI_LINE_9 281 * @arg @ref LL_EXTI_LINE_10 282 * @arg @ref LL_EXTI_LINE_11 283 * @arg @ref LL_EXTI_LINE_12 284 * @arg @ref LL_EXTI_LINE_13 285 * @arg @ref LL_EXTI_LINE_14 286 * @arg @ref LL_EXTI_LINE_15 287 * @arg @ref LL_EXTI_LINE_16 288 * @arg @ref LL_EXTI_LINE_17 289 * @arg @ref LL_EXTI_LINE_18 290 * @arg @ref LL_EXTI_LINE_19 291 * @arg @ref LL_EXTI_LINE_ALL_0_31 292 * @note Please check each device line mapping for EXTI Line availability 293 * @retval None 294 */ 295 __STATIC_INLINE void LL_EXTI_DisableIT_0_31(uint32_t ExtiLine) 296 { 297 CLEAR_BIT(EXTI->IMR, ExtiLine); 298 } 299 300 /** 301 * @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31 302 * @note The reset value for the direct or internal lines (see RM) 303 * is set to 1 in order to enable the interrupt by default. 304 * Bits are set automatically at Power on. 305 * @rmtoll IMR IMx LL_EXTI_IsEnabledIT_0_31 306 * @param ExtiLine This parameter can be one of the following values: 307 * @arg @ref LL_EXTI_LINE_0 308 * @arg @ref LL_EXTI_LINE_1 309 * @arg @ref LL_EXTI_LINE_2 310 * @arg @ref LL_EXTI_LINE_3 311 * @arg @ref LL_EXTI_LINE_4 312 * @arg @ref LL_EXTI_LINE_5 313 * @arg @ref LL_EXTI_LINE_6 314 * @arg @ref LL_EXTI_LINE_7 315 * @arg @ref LL_EXTI_LINE_8 316 * @arg @ref LL_EXTI_LINE_9 317 * @arg @ref LL_EXTI_LINE_10 318 * @arg @ref LL_EXTI_LINE_11 319 * @arg @ref LL_EXTI_LINE_12 320 * @arg @ref LL_EXTI_LINE_13 321 * @arg @ref LL_EXTI_LINE_14 322 * @arg @ref LL_EXTI_LINE_15 323 * @arg @ref LL_EXTI_LINE_16 324 * @arg @ref LL_EXTI_LINE_17 325 * @arg @ref LL_EXTI_LINE_18 326 * @arg @ref LL_EXTI_LINE_19 327 * @arg @ref LL_EXTI_LINE_ALL_0_31 328 * @note Please check each device line mapping for EXTI Line availability 329 * @retval State of bit (1 or 0). 330 */ 331 __STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT_0_31(uint32_t ExtiLine) 332 { 333 return (READ_BIT(EXTI->IMR, ExtiLine) == (ExtiLine)); 334 } 335 336 /** 337 * @} 338 */ 339 340 /** @defgroup EXTI_LL_EF_Event_Management Event_Management 341 * @{ 342 */ 343 344 /** 345 * @brief Enable ExtiLine Event request for Lines in range 0 to 31 346 * @rmtoll EMR EMx LL_EXTI_EnableEvent_0_31 347 * @param ExtiLine This parameter can be one of the following values: 348 * @arg @ref LL_EXTI_LINE_0 349 * @arg @ref LL_EXTI_LINE_1 350 * @arg @ref LL_EXTI_LINE_2 351 * @arg @ref LL_EXTI_LINE_3 352 * @arg @ref LL_EXTI_LINE_4 353 * @arg @ref LL_EXTI_LINE_5 354 * @arg @ref LL_EXTI_LINE_6 355 * @arg @ref LL_EXTI_LINE_7 356 * @arg @ref LL_EXTI_LINE_8 357 * @arg @ref LL_EXTI_LINE_9 358 * @arg @ref LL_EXTI_LINE_10 359 * @arg @ref LL_EXTI_LINE_11 360 * @arg @ref LL_EXTI_LINE_12 361 * @arg @ref LL_EXTI_LINE_13 362 * @arg @ref LL_EXTI_LINE_14 363 * @arg @ref LL_EXTI_LINE_15 364 * @arg @ref LL_EXTI_LINE_16 365 * @arg @ref LL_EXTI_LINE_17 366 * @arg @ref LL_EXTI_LINE_18 367 * @arg @ref LL_EXTI_LINE_19 368 * @arg @ref LL_EXTI_LINE_ALL_0_31 369 * @note Please check each device line mapping for EXTI Line availability 370 * @retval None 371 */ 372 __STATIC_INLINE void LL_EXTI_EnableEvent_0_31(uint32_t ExtiLine) 373 { 374 SET_BIT(EXTI->EMR, ExtiLine); 375 376 } 377 378 /** 379 * @brief Disable ExtiLine Event request for Lines in range 0 to 31 380 * @rmtoll EMR EMx LL_EXTI_DisableEvent_0_31 381 * @param ExtiLine This parameter can be one of the following values: 382 * @arg @ref LL_EXTI_LINE_0 383 * @arg @ref LL_EXTI_LINE_1 384 * @arg @ref LL_EXTI_LINE_2 385 * @arg @ref LL_EXTI_LINE_3 386 * @arg @ref LL_EXTI_LINE_4 387 * @arg @ref LL_EXTI_LINE_5 388 * @arg @ref LL_EXTI_LINE_6 389 * @arg @ref LL_EXTI_LINE_7 390 * @arg @ref LL_EXTI_LINE_8 391 * @arg @ref LL_EXTI_LINE_9 392 * @arg @ref LL_EXTI_LINE_10 393 * @arg @ref LL_EXTI_LINE_11 394 * @arg @ref LL_EXTI_LINE_12 395 * @arg @ref LL_EXTI_LINE_13 396 * @arg @ref LL_EXTI_LINE_14 397 * @arg @ref LL_EXTI_LINE_15 398 * @arg @ref LL_EXTI_LINE_16 399 * @arg @ref LL_EXTI_LINE_17 400 * @arg @ref LL_EXTI_LINE_18 401 * @arg @ref LL_EXTI_LINE_19 402 * @arg @ref LL_EXTI_LINE_ALL_0_31 403 * @note Please check each device line mapping for EXTI Line availability 404 * @retval None 405 */ 406 __STATIC_INLINE void LL_EXTI_DisableEvent_0_31(uint32_t ExtiLine) 407 { 408 CLEAR_BIT(EXTI->EMR, ExtiLine); 409 } 410 411 /** 412 * @brief Indicate if ExtiLine Event request is enabled for Lines in range 0 to 31 413 * @rmtoll EMR EMx LL_EXTI_IsEnabledEvent_0_31 414 * @param ExtiLine This parameter can be one of the following values: 415 * @arg @ref LL_EXTI_LINE_0 416 * @arg @ref LL_EXTI_LINE_1 417 * @arg @ref LL_EXTI_LINE_2 418 * @arg @ref LL_EXTI_LINE_3 419 * @arg @ref LL_EXTI_LINE_4 420 * @arg @ref LL_EXTI_LINE_5 421 * @arg @ref LL_EXTI_LINE_6 422 * @arg @ref LL_EXTI_LINE_7 423 * @arg @ref LL_EXTI_LINE_8 424 * @arg @ref LL_EXTI_LINE_9 425 * @arg @ref LL_EXTI_LINE_10 426 * @arg @ref LL_EXTI_LINE_11 427 * @arg @ref LL_EXTI_LINE_12 428 * @arg @ref LL_EXTI_LINE_13 429 * @arg @ref LL_EXTI_LINE_14 430 * @arg @ref LL_EXTI_LINE_15 431 * @arg @ref LL_EXTI_LINE_16 432 * @arg @ref LL_EXTI_LINE_17 433 * @arg @ref LL_EXTI_LINE_18 434 * @arg @ref LL_EXTI_LINE_19 435 * @arg @ref LL_EXTI_LINE_ALL_0_31 436 * @note Please check each device line mapping for EXTI Line availability 437 * @retval State of bit (1 or 0). 438 */ 439 __STATIC_INLINE uint32_t LL_EXTI_IsEnabledEvent_0_31(uint32_t ExtiLine) 440 { 441 return (READ_BIT(EXTI->EMR, ExtiLine) == (ExtiLine)); 442 443 } 444 445 /** 446 * @} 447 */ 448 449 /** @defgroup EXTI_LL_EF_Rising_Trigger_Management Rising_Trigger_Management 450 * @{ 451 */ 452 453 /** 454 * @brief Enable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 455 * @note The configurable wakeup lines are edge-triggered. No glitch must be 456 * generated on these lines. If a rising edge on a configurable interrupt 457 * line occurs during a write operation in the EXTI_RTSR register, the 458 * pending bit is not set. 459 * Rising and falling edge triggers can be set for 460 * the same interrupt line. In this case, both generate a trigger 461 * condition. 462 * @rmtoll RTSR RTx LL_EXTI_EnableRisingTrig_0_31 463 * @param ExtiLine This parameter can be a combination of the following values: 464 * @arg @ref LL_EXTI_LINE_0 465 * @arg @ref LL_EXTI_LINE_1 466 * @arg @ref LL_EXTI_LINE_2 467 * @arg @ref LL_EXTI_LINE_3 468 * @arg @ref LL_EXTI_LINE_4 469 * @arg @ref LL_EXTI_LINE_5 470 * @arg @ref LL_EXTI_LINE_6 471 * @arg @ref LL_EXTI_LINE_7 472 * @arg @ref LL_EXTI_LINE_8 473 * @arg @ref LL_EXTI_LINE_9 474 * @arg @ref LL_EXTI_LINE_10 475 * @arg @ref LL_EXTI_LINE_11 476 * @arg @ref LL_EXTI_LINE_12 477 * @arg @ref LL_EXTI_LINE_13 478 * @arg @ref LL_EXTI_LINE_14 479 * @arg @ref LL_EXTI_LINE_15 480 * @arg @ref LL_EXTI_LINE_16 481 * @arg @ref LL_EXTI_LINE_18 482 * @arg @ref LL_EXTI_LINE_19 483 * @note Please check each device line mapping for EXTI Line availability 484 * @retval None 485 */ 486 __STATIC_INLINE void LL_EXTI_EnableRisingTrig_0_31(uint32_t ExtiLine) 487 { 488 SET_BIT(EXTI->RTSR, ExtiLine); 489 490 } 491 492 /** 493 * @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31 494 * @note The configurable wakeup lines are edge-triggered. No glitch must be 495 * generated on these lines. If a rising edge on a configurable interrupt 496 * line occurs during a write operation in the EXTI_RTSR register, the 497 * pending bit is not set. 498 * Rising and falling edge triggers can be set for 499 * the same interrupt line. In this case, both generate a trigger 500 * condition. 501 * @rmtoll RTSR RTx LL_EXTI_DisableRisingTrig_0_31 502 * @param ExtiLine This parameter can be a combination of the following values: 503 * @arg @ref LL_EXTI_LINE_0 504 * @arg @ref LL_EXTI_LINE_1 505 * @arg @ref LL_EXTI_LINE_2 506 * @arg @ref LL_EXTI_LINE_3 507 * @arg @ref LL_EXTI_LINE_4 508 * @arg @ref LL_EXTI_LINE_5 509 * @arg @ref LL_EXTI_LINE_6 510 * @arg @ref LL_EXTI_LINE_7 511 * @arg @ref LL_EXTI_LINE_8 512 * @arg @ref LL_EXTI_LINE_9 513 * @arg @ref LL_EXTI_LINE_10 514 * @arg @ref LL_EXTI_LINE_11 515 * @arg @ref LL_EXTI_LINE_12 516 * @arg @ref LL_EXTI_LINE_13 517 * @arg @ref LL_EXTI_LINE_14 518 * @arg @ref LL_EXTI_LINE_15 519 * @arg @ref LL_EXTI_LINE_16 520 * @arg @ref LL_EXTI_LINE_18 521 * @arg @ref LL_EXTI_LINE_19 522 * @note Please check each device line mapping for EXTI Line availability 523 * @retval None 524 */ 525 __STATIC_INLINE void LL_EXTI_DisableRisingTrig_0_31(uint32_t ExtiLine) 526 { 527 CLEAR_BIT(EXTI->RTSR, ExtiLine); 528 529 } 530 531 /** 532 * @brief Check if rising edge trigger is enabled for Lines in range 0 to 31 533 * @rmtoll RTSR RTx LL_EXTI_IsEnabledRisingTrig_0_31 534 * @param ExtiLine This parameter can be a combination of the following values: 535 * @arg @ref LL_EXTI_LINE_0 536 * @arg @ref LL_EXTI_LINE_1 537 * @arg @ref LL_EXTI_LINE_2 538 * @arg @ref LL_EXTI_LINE_3 539 * @arg @ref LL_EXTI_LINE_4 540 * @arg @ref LL_EXTI_LINE_5 541 * @arg @ref LL_EXTI_LINE_6 542 * @arg @ref LL_EXTI_LINE_7 543 * @arg @ref LL_EXTI_LINE_8 544 * @arg @ref LL_EXTI_LINE_9 545 * @arg @ref LL_EXTI_LINE_10 546 * @arg @ref LL_EXTI_LINE_11 547 * @arg @ref LL_EXTI_LINE_12 548 * @arg @ref LL_EXTI_LINE_13 549 * @arg @ref LL_EXTI_LINE_14 550 * @arg @ref LL_EXTI_LINE_15 551 * @arg @ref LL_EXTI_LINE_16 552 * @arg @ref LL_EXTI_LINE_18 553 * @arg @ref LL_EXTI_LINE_19 554 * @note Please check each device line mapping for EXTI Line availability 555 * @retval State of bit (1 or 0). 556 */ 557 __STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig_0_31(uint32_t ExtiLine) 558 { 559 return (READ_BIT(EXTI->RTSR, ExtiLine) == (ExtiLine)); 560 } 561 562 /** 563 * @} 564 */ 565 566 /** @defgroup EXTI_LL_EF_Falling_Trigger_Management Falling_Trigger_Management 567 * @{ 568 */ 569 570 /** 571 * @brief Enable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 572 * @note The configurable wakeup lines are edge-triggered. No glitch must be 573 * generated on these lines. If a falling edge on a configurable interrupt 574 * line occurs during a write operation in the EXTI_FTSR register, the 575 * pending bit is not set. 576 * Rising and falling edge triggers can be set for 577 * the same interrupt line. In this case, both generate a trigger 578 * condition. 579 * @rmtoll FTSR FTx LL_EXTI_EnableFallingTrig_0_31 580 * @param ExtiLine This parameter can be a combination of the following values: 581 * @arg @ref LL_EXTI_LINE_0 582 * @arg @ref LL_EXTI_LINE_1 583 * @arg @ref LL_EXTI_LINE_2 584 * @arg @ref LL_EXTI_LINE_3 585 * @arg @ref LL_EXTI_LINE_4 586 * @arg @ref LL_EXTI_LINE_5 587 * @arg @ref LL_EXTI_LINE_6 588 * @arg @ref LL_EXTI_LINE_7 589 * @arg @ref LL_EXTI_LINE_8 590 * @arg @ref LL_EXTI_LINE_9 591 * @arg @ref LL_EXTI_LINE_10 592 * @arg @ref LL_EXTI_LINE_11 593 * @arg @ref LL_EXTI_LINE_12 594 * @arg @ref LL_EXTI_LINE_13 595 * @arg @ref LL_EXTI_LINE_14 596 * @arg @ref LL_EXTI_LINE_15 597 * @arg @ref LL_EXTI_LINE_16 598 * @arg @ref LL_EXTI_LINE_18 599 * @arg @ref LL_EXTI_LINE_19 600 * @note Please check each device line mapping for EXTI Line availability 601 * @retval None 602 */ 603 __STATIC_INLINE void LL_EXTI_EnableFallingTrig_0_31(uint32_t ExtiLine) 604 { 605 SET_BIT(EXTI->FTSR, ExtiLine); 606 } 607 608 /** 609 * @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31 610 * @note The configurable wakeup lines are edge-triggered. No glitch must be 611 * generated on these lines. If a Falling edge on a configurable interrupt 612 * line occurs during a write operation in the EXTI_FTSR register, the 613 * pending bit is not set. 614 * Rising and falling edge triggers can be set for the same interrupt line. 615 * In this case, both generate a trigger condition. 616 * @rmtoll FTSR FTx LL_EXTI_DisableFallingTrig_0_31 617 * @param ExtiLine This parameter can be a combination of the following values: 618 * @arg @ref LL_EXTI_LINE_0 619 * @arg @ref LL_EXTI_LINE_1 620 * @arg @ref LL_EXTI_LINE_2 621 * @arg @ref LL_EXTI_LINE_3 622 * @arg @ref LL_EXTI_LINE_4 623 * @arg @ref LL_EXTI_LINE_5 624 * @arg @ref LL_EXTI_LINE_6 625 * @arg @ref LL_EXTI_LINE_7 626 * @arg @ref LL_EXTI_LINE_8 627 * @arg @ref LL_EXTI_LINE_9 628 * @arg @ref LL_EXTI_LINE_10 629 * @arg @ref LL_EXTI_LINE_11 630 * @arg @ref LL_EXTI_LINE_12 631 * @arg @ref LL_EXTI_LINE_13 632 * @arg @ref LL_EXTI_LINE_14 633 * @arg @ref LL_EXTI_LINE_15 634 * @arg @ref LL_EXTI_LINE_16 635 * @arg @ref LL_EXTI_LINE_18 636 * @arg @ref LL_EXTI_LINE_19 637 * @note Please check each device line mapping for EXTI Line availability 638 * @retval None 639 */ 640 __STATIC_INLINE void LL_EXTI_DisableFallingTrig_0_31(uint32_t ExtiLine) 641 { 642 CLEAR_BIT(EXTI->FTSR, ExtiLine); 643 } 644 645 /** 646 * @brief Check if falling edge trigger is enabled for Lines in range 0 to 31 647 * @rmtoll FTSR FTx LL_EXTI_IsEnabledFallingTrig_0_31 648 * @param ExtiLine This parameter can be a combination of the following values: 649 * @arg @ref LL_EXTI_LINE_0 650 * @arg @ref LL_EXTI_LINE_1 651 * @arg @ref LL_EXTI_LINE_2 652 * @arg @ref LL_EXTI_LINE_3 653 * @arg @ref LL_EXTI_LINE_4 654 * @arg @ref LL_EXTI_LINE_5 655 * @arg @ref LL_EXTI_LINE_6 656 * @arg @ref LL_EXTI_LINE_7 657 * @arg @ref LL_EXTI_LINE_8 658 * @arg @ref LL_EXTI_LINE_9 659 * @arg @ref LL_EXTI_LINE_10 660 * @arg @ref LL_EXTI_LINE_11 661 * @arg @ref LL_EXTI_LINE_12 662 * @arg @ref LL_EXTI_LINE_13 663 * @arg @ref LL_EXTI_LINE_14 664 * @arg @ref LL_EXTI_LINE_15 665 * @arg @ref LL_EXTI_LINE_16 666 * @arg @ref LL_EXTI_LINE_18 667 * @arg @ref LL_EXTI_LINE_19 668 * @note Please check each device line mapping for EXTI Line availability 669 * @retval State of bit (1 or 0). 670 */ 671 __STATIC_INLINE uint32_t LL_EXTI_IsEnabledFallingTrig_0_31( 672 uint32_t ExtiLine) 673 { 674 return (READ_BIT(EXTI->FTSR, ExtiLine) == (ExtiLine)); 675 } 676 677 /** 678 * @} 679 */ 680 681 /** @defgroup EXTI_LL_EF_Software_Interrupt_Management Software_Interrupt_Management 682 * @{ 683 */ 684 685 /** 686 * @brief Generate a software Interrupt Event for Lines in range 0 to 31 687 * @note If the interrupt is enabled on this line in the EXTI_IMR, writing a 1 to 688 * this bit when it is at '0' sets the corresponding pending bit in EXTI_PR 689 * resulting in an interrupt request generation. 690 * This bit is cleared by clearing the corresponding bit in the EXTI_PR 691 * register (by writing a 1 into the bit) 692 * @rmtoll SWIER SWIx LL_EXTI_GenerateSWI_0_31 693 * @param ExtiLine This parameter can be a combination of the following values: 694 * @arg @ref LL_EXTI_LINE_0 695 * @arg @ref LL_EXTI_LINE_1 696 * @arg @ref LL_EXTI_LINE_2 697 * @arg @ref LL_EXTI_LINE_3 698 * @arg @ref LL_EXTI_LINE_4 699 * @arg @ref LL_EXTI_LINE_5 700 * @arg @ref LL_EXTI_LINE_6 701 * @arg @ref LL_EXTI_LINE_7 702 * @arg @ref LL_EXTI_LINE_8 703 * @arg @ref LL_EXTI_LINE_9 704 * @arg @ref LL_EXTI_LINE_10 705 * @arg @ref LL_EXTI_LINE_11 706 * @arg @ref LL_EXTI_LINE_12 707 * @arg @ref LL_EXTI_LINE_13 708 * @arg @ref LL_EXTI_LINE_14 709 * @arg @ref LL_EXTI_LINE_15 710 * @arg @ref LL_EXTI_LINE_16 711 * @arg @ref LL_EXTI_LINE_18 712 * @arg @ref LL_EXTI_LINE_19 713 * @note Please check each device line mapping for EXTI Line availability 714 * @retval None 715 */ 716 __STATIC_INLINE void LL_EXTI_GenerateSWI_0_31(uint32_t ExtiLine) 717 { 718 SET_BIT(EXTI->SWIER, ExtiLine); 719 } 720 721 /** 722 * @} 723 */ 724 725 /** @defgroup EXTI_LL_EF_Flag_Management Flag_Management 726 * @{ 727 */ 728 729 /** 730 * @brief Check if the ExtLine Flag is set or not for Lines in range 0 to 31 731 * @note This bit is set when the selected edge event arrives on the interrupt 732 * line. This bit is cleared by writing a 1 to the bit. 733 * @rmtoll PR PIFx LL_EXTI_IsActiveFlag_0_31 734 * @param ExtiLine This parameter can be a combination of the following values: 735 * @arg @ref LL_EXTI_LINE_0 736 * @arg @ref LL_EXTI_LINE_1 737 * @arg @ref LL_EXTI_LINE_2 738 * @arg @ref LL_EXTI_LINE_3 739 * @arg @ref LL_EXTI_LINE_4 740 * @arg @ref LL_EXTI_LINE_5 741 * @arg @ref LL_EXTI_LINE_6 742 * @arg @ref LL_EXTI_LINE_7 743 * @arg @ref LL_EXTI_LINE_8 744 * @arg @ref LL_EXTI_LINE_9 745 * @arg @ref LL_EXTI_LINE_10 746 * @arg @ref LL_EXTI_LINE_11 747 * @arg @ref LL_EXTI_LINE_12 748 * @arg @ref LL_EXTI_LINE_13 749 * @arg @ref LL_EXTI_LINE_14 750 * @arg @ref LL_EXTI_LINE_15 751 * @arg @ref LL_EXTI_LINE_16 752 * @arg @ref LL_EXTI_LINE_18 753 * @arg @ref LL_EXTI_LINE_19 754 * @note Please check each device line mapping for EXTI Line availability 755 * @retval State of bit (1 or 0). 756 */ 757 __STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag_0_31(uint32_t ExtiLine) 758 { 759 return (READ_BIT(EXTI->PR, ExtiLine) == (ExtiLine)); 760 } 761 762 /** 763 * @brief Read ExtLine Combination Flag for Lines in range 0 to 31 764 * @note This bit is set when the selected edge event arrives on the interrupt 765 * line. This bit is cleared by writing a 1 to the bit. 766 * @rmtoll PR PIFx LL_EXTI_ReadFlag_0_31 767 * @param ExtiLine This parameter can be a combination of the following values: 768 * @arg @ref LL_EXTI_LINE_0 769 * @arg @ref LL_EXTI_LINE_1 770 * @arg @ref LL_EXTI_LINE_2 771 * @arg @ref LL_EXTI_LINE_3 772 * @arg @ref LL_EXTI_LINE_4 773 * @arg @ref LL_EXTI_LINE_5 774 * @arg @ref LL_EXTI_LINE_6 775 * @arg @ref LL_EXTI_LINE_7 776 * @arg @ref LL_EXTI_LINE_8 777 * @arg @ref LL_EXTI_LINE_9 778 * @arg @ref LL_EXTI_LINE_10 779 * @arg @ref LL_EXTI_LINE_11 780 * @arg @ref LL_EXTI_LINE_12 781 * @arg @ref LL_EXTI_LINE_13 782 * @arg @ref LL_EXTI_LINE_14 783 * @arg @ref LL_EXTI_LINE_15 784 * @arg @ref LL_EXTI_LINE_16 785 * @arg @ref LL_EXTI_LINE_18 786 * @arg @ref LL_EXTI_LINE_19 787 * @note Please check each device line mapping for EXTI Line availability 788 * @retval @note This bit is set when the selected edge event arrives on the interrupt 789 */ 790 __STATIC_INLINE uint32_t LL_EXTI_ReadFlag_0_31(uint32_t ExtiLine) 791 { 792 return (uint32_t) (READ_BIT(EXTI->PR, ExtiLine)); 793 } 794 795 /** 796 * @brief Clear ExtLine Flags for Lines in range 0 to 31 797 * @note This bit is set when the selected edge event arrives on the interrupt 798 * line. This bit is cleared by writing a 1 to the bit. 799 * @rmtoll PR PIFx LL_EXTI_ClearFlag_0_31 800 * @param ExtiLine This parameter can be a combination of the following values: 801 * @arg @ref LL_EXTI_LINE_0 802 * @arg @ref LL_EXTI_LINE_1 803 * @arg @ref LL_EXTI_LINE_2 804 * @arg @ref LL_EXTI_LINE_3 805 * @arg @ref LL_EXTI_LINE_4 806 * @arg @ref LL_EXTI_LINE_5 807 * @arg @ref LL_EXTI_LINE_6 808 * @arg @ref LL_EXTI_LINE_7 809 * @arg @ref LL_EXTI_LINE_8 810 * @arg @ref LL_EXTI_LINE_9 811 * @arg @ref LL_EXTI_LINE_10 812 * @arg @ref LL_EXTI_LINE_11 813 * @arg @ref LL_EXTI_LINE_12 814 * @arg @ref LL_EXTI_LINE_13 815 * @arg @ref LL_EXTI_LINE_14 816 * @arg @ref LL_EXTI_LINE_15 817 * @arg @ref LL_EXTI_LINE_16 818 * @arg @ref LL_EXTI_LINE_18 819 * @arg @ref LL_EXTI_LINE_19 820 * @note Please check each device line mapping for EXTI Line availability 821 * @retval None 822 */ 823 __STATIC_INLINE void LL_EXTI_ClearFlag_0_31(uint32_t ExtiLine) 824 { 825 WRITE_REG(EXTI->PR, ExtiLine); 826 } 827 828 /** 829 * @} 830 */ 831 832 #if defined(USE_FULL_LL_DRIVER) 833 /** @defgroup EXTI_LL_EF_Init Initialization and de-initialization functions 834 * @{ 835 */ 836 837 uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct); 838 uint32_t LL_EXTI_DeInit(void); 839 void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct); 840 841 842 /** 843 * @} 844 */ 845 #endif /* USE_FULL_LL_DRIVER */ 846 847 /** 848 * @} 849 */ 850 851 /** 852 * @} 853 */ 854 855 #endif /* EXTI */ 856 857 /** 858 * @} 859 */ 860 861 #ifdef __cplusplus 862 } 863 #endif 864 865 #endif /* STM32F1xx_LL_EXTI_H */ 866